3
SYMBOLS
FEATURES
KNOW YOUR CHARGER
See Figure 1.
The safe use of this product requires an understanding
of the information on the product and in this operator’s
manual as well as a knowledge of the project you are
attempting. Before use of this product, familiarize yourself
with all operating features and safety rules.
LED DISPLAY
The LED lights located next to each battery port indicate
the charge status of each battery.
PRODUCT SPECIFICATIONS
Charger Voltage ................................ 11053 — 9.6 Volt DC
11055 — 12 Volt DC
11006 — 14.4 Volt DC
11466 — 15.6 Volt DC
11369 — 16.8 Volt DC
11379 — 18 Volt DC
Fig. 1
Charger Input.....................................120 V, 60 Hz, AC only
Charge Rate .............................................................. 3 hour
Cord Length .................................................................. 6 ft.
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the product better and safer.
Wet Conditions Alert Do not expose to rain or use in damp locations.
Read The Operator’s Manual
To reduce the risk of injury, user must read and understand
operator’s manual before using this product.
Eye Protection
Always wear safety goggles or safety glasses with side shields and,
as necessary, a full face shield when operating this product.
Safety Alert Precautions that involve your safety.
SYMBOL NAME
DESIGNATION/EXPLANATION
APPLICATIONS
You may use this product for the following purposes:
Portable charging of Craftsman batteries as indicated
by the chart that follows
CAUTION: If at any point during the charging
process none of the LEDs are lit, remove the battery
pack from the charger to avoid damaging the
product. DO NOT insert another battery. Return the
charger and battery to your nearest service center
for service or replacement.
OPERATION
To Next Page
Loading...
