To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 917.298231 and is the answer not in the manual?
General| Manufacturer | Craftsman |
|---|---|
| Model Number | 917.298231 |
| Engine Displacement | 208cc |
| Tilling Width | 18 inches |
| Tilling Depth | 6 inches |
| Forward Speeds | 1 |
| Reverse Speeds | 1 |
| Tine Rotation | Counter-rotating |
| Wheel Diameter | 13 inches |
| Engine Type | 4-cycle |
| Warranty | 2 years |
Learn operation, familiarize with controls, and prepare the work area safely.
Follow guidelines for safe use, handling foreign objects, and preventing accidents.
Ensure safe upkeep and proper storage to prevent hazards and damage.
Lists necessary tools and components for assembling the tiller.
Identifies the correct stance and orientation for the tiller operator.
Step-by-step guide for unpacking the tiller and attaching the handle assembly.
Instructions for correctly installing the depth stake for tilling depth control.
Information on adjusting handle height and tilling width for user comfort and conditions.
Procedure to verify proper functioning of the tiller's tines before initial use.
Familiarize yourself with tiller controls, adjustments, and safety features.
Explains safety decals and the tiller's compliance with ANSI standards.
Guides on moving the tiller forward and safely stopping the engine and tines.
Details on regulating tilling depth/speed and procedures for restarting a warm engine.
Instructions for adjusting depth stake and wheels for optimal tilling performance.
Procedures for safely transporting the tiller and filling the engine with oil.
Steps for filling the fuel tank and starting the engine, including cold start procedures.
Tips for effective tilling, soil preparation, and cultivating weeds.
Guidelines for operating the tiller in cold weather and preparing for winter storage.
Procedures for cleaning the engine's cooling system and air cleaner for optimal performance.
Information on muffler care, spark plug replacement, and gap setting.
Details on checking engine oil levels, changing oil, and transmission maintenance.
Advice on protecting the tiller's painted surfaces and wheels.
Instructions for adjusting the tiller's handle height for operator comfort.
Configuration options for tines including Normal, Mid-Width, and Narrow tilling paths.
Specific tine setups for edging and narrow cultivating tasks.
Procedure to verify the correct functionality of the tine control lever and tines.
Guides for adjusting carburetor, idle RPM, and throttle control cable.
Instructions on when and how to replace the tiller's V-belt.
Solutions for problems related to the engine not starting or lacking power.
Addresses issues like excessive bounce, difficult handling, and soil buildup.
Illustrated parts breakdown for the tiller's handle assembly.
Illustrated parts breakdown for the belt guard and pulley system.
Illustrated parts breakdown for the tiller's wheels and depth stake assembly.
Illustrated parts breakdown for the tiller's tine assemblies.
Illustrated parts breakdown for the transmission and tine shield.
Illustrated parts breakdown for the right side of the engine.
Illustrated parts breakdown for the rear of the engine.
Illustrated parts breakdown for the internal components of the engine.
