EasyManua.ls Logo

Craftsman 919.670031 - User Manual

Craftsman 919.670031
38 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
• SAFETY GUIDELINES
• ASSEMBLY
• OPERATION
• MAINTENANCE
• TROUBLESHOOTING
• REPAIR PARTS
IMPORTANT:
Read the Safety Guidelines
and All Instructions Carefully
Before Operating
Model No.
919.670031
Sold by Sears Canada, Inc., Toronto, Ont. M5B 2B8
120 VOLT • 3000 WATT
GENERATOR
D20346 Rev 0 2/28/00
OWNER'S
MANUAL

Questions and Answers

  • C
    Cynthia HillJul 30, 2025
    Why won't my Craftsman 919.670031 engine start?
    • W
      Whitney HernandezJul 30, 2025
      If your Craftsman Portable Generator engine won't start, there are several potential causes. First, ensure that you have enough fuel or oil; if not, add some. Second, check that the ignition switch is in the "ON" position. Third, a faulty spark plug could be the culprit, so replace it if necessary. Fourth, adjust the choke to the correct position. Fifth, make sure the fuel shut-off valve is open. Sixth, remove any load from the unit during start-up. Finally, ensure the spark plug wire is securely attached.
  • A
    Angelica ValenciaAug 6, 2025
    What to do if the circuit breaker keeps tripping on my Craftsman 919.670031 Portable Generator?
    • R
      Richard LynchAug 6, 2025
      Repeated circuit breaker tripping in your Craftsman Portable Generator is typically due to an overload. Try reducing the load on the generator. Another cause could be faulty cords or equipment. Inspect your cords and equipment for any damaged, bare, or frayed wires, and replace them if found.
  • J
    Jane ThomasAug 14, 2025
    Why is my Craftsman 919.670031 Portable Generator overheating?
    • M
      Melissa ThomasAug 14, 2025
      If your Craftsman Portable Generator is overheating, it could be due to a generator overload. Try reducing the load. Another possible cause is insufficient ventilation. Move the generator to an area with an adequate supply of fresh air.
  • S
    Susan PrattAug 22, 2025
    What to do if my Craftsman Portable Generator has no electrical output?
    • J
      jasonmcculloughAug 22, 2025
      If your Craftsman Portable Generator has no electrical output, the receptacle might be faulty, and you should have an Authorized Sears Service Center replace it. Also, check if the circuit breaker has tripped; if so, depress and reset it. A defective capacitor could also be the cause, requiring replacement by an Authorized Sears Service Center. Lastly, a faulty power cord could be the problem; in that case, repair or replace the cord.

Summary

Safety Guidelines

Risk of Electrocution and Fire

Details hazards related to electrical shock and fire, with prevention methods.

Risk of Fire

Covers hazards associated with fuel handling, storage, and generator ventilation.

Breathing and Inhalation Hazards

Covers risks from carbon monoxide exhaust fumes and safe operating areas.

Risk of Unsafe Operation

Highlights dangers of careless operation, improper appliance connection, and lifting.

Physical Hazards

Covers risks from hot surfaces, moving parts, and lifting the generator.

Operation

Generator Capacity and Load Management

Explains how to match appliances to generator capacity and avoid overloading.

Starting the Generator

Step-by-step instructions for starting the generator engine.

Connecting Electrical Loads

Guides on connecting appliances, prioritizing inductive loads and surge protectors.

Maintenance

Engine Oil Maintenance

Guidance on checking and changing engine oil for optimal performance.

Spark Plug Service

Procedure for checking, cleaning, and replacing the spark plug.

Storage and Troubleshooting

Craftsman 919.670031 Specifications

General IconGeneral
Model919.670031
TypePortable Generator
Fuel TypeGasoline
Engine Type4-Stroke OHV
Starting SystemRecoil
Weight110 lbs
Starting Wattage3500 W
Running Wattage3000 W
EngineCraftsman
Tank Capacity4 gal
Noise Level68 dB at 23 feet
AC Output120V
DC Output12V
Outlets1 x 12V DC Outlet

Related product manuals