To Next Page
K
Kenneth TannerJul 26, 2025
What to do if Craftsman Inverter engine will not start?
- EelliottdawnJul 26, 2025
If your Craftsman Inverter engine won't start, several issues could be the cause. Here's what to check: * Ensure the fuel valve is in the 'On' position and the rocker switch is also set to 'On'. * Check the air filter and clean or replace it if it's dirty. * Make sure there's fresh gasoline in the tank, and the spark plug wire is connected to the spark plug; replace the spark plug if it is bad. * Drain the fuel tank and fill it with fresh fuel if there is water in gasoline or stale gasoline. * If the engine is overchoking, open the choke fully and crank the engine. * Check the oil level and fill the crankcase to the proper level.
General
