EasyManua.ls Logo

Craftsman 580.326300 - User Manual

Craftsman 580.326300
52 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Owner's Manual
®
Start
AC
Model No.
580.326300
GENERATOR
CU8TOMER
HELPLJNE
HOURS: Non. - Fri. 8 a.m. to 5 p.m. (CT)
CAUTION
Before using this product, read this
manual and follow all Safety Rules and
Operating Instructions.
Sears, Roebuck and Co., Hoffman Estates, _L 60179 U.S.A.
Visit our Craftsman website: www.craftsmamcom
Part No. 191759 Draft 4 (I2/15/2004)
PRECAUCION
Antes de utilizar el producto, lea este
manual y siga todas las Reglas de
Seguridad e Instrucciones de Uso.
o Safety
o Assembly
o Operation
o Maintenance
o Parts
o Espa_oN
0 3

Table of Contents

Questions and Answers

  • J
    John OrtizJul 31, 2025
    How to fix a Craftsman Inverter that will not start?
    • J
      Jose BakerJul 31, 2025
      If your Craftsman Inverter engine won't start, or starts and runs rough, there are several potential causes: * The fuel valve may be in the "Off" position: Set it to "On". * The rocker switch may be set to "Off": Set it to "On". * The air cleaner might be dirty: Clean or replace it. * The unit might be out of or have stale fuel: Fill the fuel tank or drain and refill with fresh fuel. * The spark plug wire may not be connected: Connect it. * The spark plug could be bad: Replace it. * There may be water in the fuel: Drain and refill with fresh fuel. * It may be overchoking: Open the choke fully and crank the engine. * The oil level could be low: Fill the crankcase to the proper level.
  • L
    lindsay52Aug 7, 2025
    What to do if my Craftsman Inverter has no AC output?
    • J
      Jeremy MunozAug 7, 2025
      If your Craftsman Inverter engine is running, but there's no AC output, it could be due to several reasons: 1. One of the circuit breakers is open: Reset the circuit breaker. 2. There's a poor connection or defective cord set: Check and repair the connection or cord set. 3. The connected device is faulty: Connect another device that is in good condition.
  • M
    Melissa LeeAug 15, 2025
    Why does my Craftsman Inverter engine lack power?
    • L
      Lynn HollandAug 15, 2025
      If your Craftsman Inverter engine lacks power, it could be due to: * The load being too high: Consult the "Don't Overload Generator" section. * A dirty air filter: Replace the air filter.
  • P
    Patricia MartinezAug 22, 2025
    What to do if Craftsman Inverter bogs down when load is connected?
    • G
      Gregory JohnsonAug 22, 2025
      If the Craftsman Inverter engine runs well at no-load but bogs down when loads are connected, it could be caused by: * A short circuit in a connected load: Disconnect the shorted electrical load. * The generator being overloaded: Refer to the "Don't Overload Generator" section.

Summary

Safety Rules

Assembly

Assembling the Wheel Kit

Before Starting the Generator

Add Engine Oil

Instructions on selecting the correct oil viscosity and filling the engine crankcase.

Add Fuel

Guidance on adding clean, fresh, unleaded fuel and fuel tank capacity.

Operation

How to Use Your Generator

Provides instructions on operating the generator, including system ground and connections.

System Ground

Connecting to a Buildings Electrical System

Details on safe connection to a building's electrical system by a qualified electrician.

Generator Location

Guidelines for safe placement and clearance of the generator for ventilation and fire prevention.

To Start the Engine

To Stop the Engine

Steps to safely shut down the generator engine after use.

Connecting Electrical Loads

Cord Sets and Receptacles

Dont Overload Generator

Capacity

Explains how to determine the generator's capacity for running multiple items.

Power Management

Steps for safely managing generator power by sequentially adding electrical loads.

Specifications

Maintenance

Owners Responsibilities and Schedule

Outlines owner's duties, maintenance schedule, and general recommendations for upkeep.

Specific Maintenance Tasks

Engine Maintenance

Pre-Repair Safety and Initial Checks

Routine Engine Maintenance Procedures

Spark Arrester Inspection and Cleaning Details

Troubleshooting

No AC Output Available

Addresses issues where the engine runs but no electrical output is generated.

Engine Bogs Down Under Load

Solutions for when the engine performance degrades under load.

Starting or Running Rough Issues

Troubleshooting steps for starting issues or rough engine running.

Engine Shuts Down During Operation

Identifies causes and solutions for the engine unexpectedly shutting down.

Engine Lacks Power or Hunts

Addresses issues related to insufficient power or erratic engine operation.

Parts

Craftsman 580.326300 Specifications

General IconGeneral
BrandCraftsman
Model580.326300
CategoryPortable Generator
LanguageEnglish

Related product manuals