To Next PageTo Next PageWhat to do if my Craftsman Portable Generator engine runs, but there's no AC output?
If your Craftsman Portable Generator's engine is running but there's no AC output, it could be due to several reasons: * One of the circuit breakers may be open. Reset the circuit breaker. * There might be a poor connection or a defective cord set. Check and repair. * The connected device may be faulty. Connect another device that is in good condition.
Why does my Craftsman 580.323600 bog down when I connect loads?
If your Craftsman Portable Generator runs well without a load but bogs down when loads are connected, it could be due to: * A short circuit in a connected load. Disconnect the shorted electrical load. * The generator is overloaded. See “Don't Overload Generator.”
Why does my Craftsman 580.323600 Portable Generator lack power?
If your Craftsman Portable Generator engine lacks power, it could be because: * The load is too high. See “Don't Overload Generator.” * The air filter is dirty. Replace the air filter.
General| Generator Type | Portable |
|---|---|
| Fuel Type | Gasoline |
| Engine Type | 4-Stroke OHV |
| Starting System | Recoil |
| Noise Level | 68 dBA |
| Running Watts | 3000 W |
| Rated Watts | 3000 W |
| AC Output | 120V |
| Voltage | 120V |
| Fuel Tank Capacity | 4 gallons |
Outlines warranty coverage, periods, and exclusions for Craftsman generators.
Explains the meaning of DANGER, WARNING, and CAUTION symbols for safe operation.
Details critical hazards like carbon monoxide, electrical shock, and grounding.
Provides warnings for refueling, fuel storage, and hot engine parts.
Identifies and describes main controls like rocker switch, choke, and starter.
Details the types and capacities of the generator's AC receptacles.
Covers components like fuel tank, air cleaner, and grounding fastener.
Instructions for removing the generator from its shipping carton and checking contents.
Step-by-step guide for attaching the wheel kit for improved portability.
Explains grounding and provides steps for safely starting the generator engine.
Guidance on safely connecting loads and avoiding overload.
Detailed steps for safely stopping the generator engine.
Tips to prevent carburetor icing and ensure operation in cold temperatures.
Instructions on calculating total wattage requirements and avoiding overload.
Recommendations for sequentially adding loads to protect the generator and devices.
Recommended maintenance tasks and general care advice for the generator.
Key technical specifications for the generator and its engine.
Detailed instructions for checking oil, changing oil, spark plug, and air cleaner.
Procedures for preparing the generator for extended periods of non-use.
Steps to prevent fuel system issues like gum deposits during storage.
Steps to resolve issues where the generator runs but has no electrical output.
Diagnoses issues like bogging down, rough running, or engine shutdowns.
Addresses failure to start, rough running, and engine lacks power.
Provides the electrical schematic and wiring diagram for the generator.
Lists parts and shows an exploded view of the alternator assembly.
Details components of the main generator unit with an exploded view.
Illustrates the control panel components and lists available parts.
Provides exploded views and parts lists for the Briggs & Stratton engine.
Outlines owner responsibilities and warranty coverage for emission control systems.
Lists the specific emission control system parts covered by the warranty.
Details conditions and actions that void the emission control system warranty.
Information on scheduling professional repair services at your home or carry-in locations.
Information on buying extended protection plans for products.
