EasyManua.ls Logo

Craftsman 944.367402 - User Manual

Craftsman 944.367402
28 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Model No.
944.367402
CAUTION:
Read and follow all
Safety Rules and In struc tions
before operating this equipment
Owner’s Manual
ROTARY LAWN MOWER
650 Series Briggs & Stratton Engine
21" Multi-Cut
Sears Canada, Inc., Toronto, Ontario M5B 2B8

Table of Contents

Questions and Answers

  • K
    kristasmithAug 8, 2025
    Why Craftsman 944.367402 does not start?
    • E
      Emily PooleAug 8, 2025
      Your Craftsman Lawn Mower might not start due to several reasons: a dirty air filter (clean or replace it), lack of fuel (fill the fuel tank), stale or water-contaminated fuel (empty and refill with fresh gasoline), a disconnected spark plug wire (connect it), a bad spark plug (replace it), a loose or broken blade adapter (tighten or replace it), the control bar not depressed (depress it), a defective control bar (replace it), the fuel valve lever in the OFF position (turn it ON), a weak battery (charge it), or a disconnected battery connector (connect it).
  • Z
    Zachary TaylorAug 12, 2025
    Why Craftsman 944.367402 poor cut uneven?
    • I
      Isaac PriceAug 12, 2025
      An uneven cut with your Craftsman Lawn Mower may be caused by a worn, bent, or loose blade (replace the blade and tighten the blade bolt), uneven wheel heights (set all wheels at the same height), or a buildup of grass under the mower (clean the underside of the mower housing).
  • S
    sara77Aug 16, 2025
    What to do if Craftsman 944.367402 Lawn Mower grass catcher not filling?
    • D
      Daniel SmithAug 16, 2025
      If the grass catcher on your Craftsman Lawn Mower isn't filling, it could be because the cutting height is too low (raise it), the lift on the blade is worn off (replace the blade), or the catcher isn't venting air (clean the grass catcher).
  • C
    Christine DunnAug 20, 2025
    What to do if Craftsman Lawn Mower loses power?
    • T
      thomaswalshAug 20, 2025
      If your Craftsman Lawn Mower is losing power, it could be due to the rear of the mower housing or blade dragging in the grass (raise the cutting height), cutting too much grass (raise the cutting height), a dirty air filter (clean or replace it), a buildup of grass under the mower (clean the underside), too much oil in the engine (check the oil level), or walking speed being too fast (cut at a slower speed).
  • T
    Taylor PadillaAug 25, 2025
    Why is Craftsman 944.367402 starter rope hard to pull?
    • J
      Jeffrey BrownAug 26, 2025
      A hard-to-pull starter rope on your Craftsman Lawn Mower may be due to the engine flywheel brake being engaged when the control bar is released (depress the control bar before pulling), a bent engine crankshaft (contact a qualified service center), a broken blade adapter (replace it), or the blade dragging in the grass (move the mower to clear grass).
  • W
    wvazquezAug 29, 2025
    What causes excessive vibration in Craftsman 944.367402 Lawn Mower?
    • S
      Sonia GomezAug 29, 2025
      Excessive vibration in your Craftsman Lawn Mower can be caused by a worn, bent, or loose blade (replace the blade and tighten the blade bolt) or a bent engine crankshaft (contact a qualified service center).
  • C
    currythomasSep 3, 2025
    Why is Craftsman Lawn Mower hard to push?
    • C
      Candace ChavezSep 3, 2025
      Your Craftsman Lawn Mower might be hard to push if the grass is too high or the wheel height is too low (raise the cutting height), the rear of the mower housing or blade is dragging (raise the rear of the mower housing), the grass catcher is too full (empty it), or the handle height isn't right for you (adjust it).

Craftsman 944.367402 Specifications

General IconGeneral
BrandCraftsman
Model944.367402
CategoryLawn Mower
LanguageEnglish

Related product manuals