Craftsman Bolt-On 35592 User Manual

Corded Power Unit &
Drill Attachment
Model: 35592
Sears Brands Management Corporation,
Hoffman Estates, IL 60179 U.S.A.
• Safety
• OperatiOn
• Maintenance
• trOubleShOOting
• eSpañOlpg.9
cautiOn:Read, understand and follow
all Safety Rules and Operating Instructions
in this manual before using this product.
Operator’s Manual
See the full line of Craftsman
®
products
at craftsman.com
Part No. 90597924 May 13

Craftsman Bolt-On 35592 Specifications

General

Brand	Craftsman
Model	Bolt-On 35592
Category	Drill
Language	English

Summary

Craftsman Limited Warranty

Understanding Symbols and Warnings

Symbol Signal Meaning

Defines symbols like DANGER, WARNING, CAUTION, and alerts for hazardous situations.

General Power Tool Safety Warnings

Emphasizes reading all safety warnings and instructions to prevent electric shock, fire, or injury.

Work Area Safety

Keep work area clean and lit; avoid explosive atmospheres; keep children away.

Electrical and Personal Safety

Electrical Safety

Match plugs to outlets, avoid grounded surfaces, keep away from water, protect cords.

Personal Safety

Stay alert, use PPE, prevent unintentional starting, dress properly.

Power Tool Use and Care

Use correct tool, don't force, disconnect power for adjustments, maintain tools.

Service and Specific Safety

Service

Have tool serviced by qualified personnel using identical replacement parts.

Drill Safety Warnings

Hold tool firmly, secure workpiece, keep away from vents, avoid dust, wear PPE.

Tool Components and Operation

Parts and Features

Identifies key components of the power unit and drill attachment.

Power Unit Operation

Control direction (forward/reverse) and speed via trigger switch.

Attachment and Drill Operation

Installing and Removing Attachments

Unplug tool before changing attachments. Securely attach by pushing until it clicks.

Drill/Screwdriver Attachment Operation

Hold firmly, secure bit, avoid stalls, do not overload.

Fitting and Removing Drill Bits

Unplug tool. Open chuck by turning front part counterclockwise, insert bit, tighten clockwise.

Advanced Operation and Techniques

Screw Driving

Use correct bits, lubricate if needed, align with screw, use reverse for removal.

Keyless Chuck Usage

Unplug tool. Grasp rear half, rotate front half to open/close chuck to insert/tighten bits.

Torque Control

Set collar for drilling or screwdriving. Adjust torque setting by trial and error.

Drilling

Use sharp bits, secure workpiece, use light pressure, apply pressure straight, control twisting.

Specific Drilling and Maintenance

Drilling in Wood

Use twist or spade bits, keep sharp, clear chips frequently.

Drilling in Metal

Use cutting lubricant for most metals; drill cast iron and brass dry.

Maintenance

Clean tool with mild soap and damp cloth. Never immerse in liquid.

Accessories

Information on purchasing recommended accessories for the tool.

Troubleshooting