SAVE THESE INSTRUCIONS
Some of the following symbols may be used on this tool. Please study them
and learn their meaning. Proper interpretation of these symbols will allow you to
operate the tool better and more safely.
SYMBOL NAME DESIGNATION/EXPLANATION
V Volts Voltage
A Amperes Current
Hz Hertz Frequency (cycles per second)
W Watt Power
rain Minutes Time
Alternating Current Type of current
--_ Direct Current Type or a characteristic of current
n 0 No Load Speed Rotational speed, at no load
] Class II Construction Double-insulated construction
.../min Per Minute Revolutions, strokes, surface speed,
orbits, etc., per minute
Wet Conditions Alert Do not expose to rain or use in damp
locations.
To reduce the risk of injury, user must
Read The Operator's Manual read and understand operator's manual
before using this product.
O Always wear safety goggles or safety
Eye Protection glasses with side shields and a full face
shield when operating this product.
,_ Alert Precautions that involve
Safety
your
safety.
No-Hands Symbol Failure to keep your hands away from theblade will result in serious personal injury.
Failure to keep your hands away from theNo-Hands Symbol blade will result in serious personal injury.
No-Hands Failure to keep your hands away from the
Symbol
blade will result in serious personal injury.
Failure to keep your hands away from the
No-Hands Symbol blade will result in serious personal injury.
Hot Surface To reduce the risk of injury or damage,
avoid contact with any hot surface.
4
To Next Page
Loading...
Need help?
General
