To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 11585 - C3 19.2 Volt 7-1/4 in. Circular Saw and is the answer not in the manual?
General| Voltage | 19.2 Volt |
|---|---|
| Blade Diameter | 7-1/4 in. |
| Type | Circular Saw |
| Category | Saw |
| Model | 11585 |
| Brand | Craftsman |
Guidelines for maintaining a safe and clean work environment to prevent accidents.
Precautions for safe use of power tools connected to electricity, avoiding shock hazards.
Advice on staying alert, using safety equipment, and dressing appropriately during operation.
Instructions on proper application, maintenance, and safe handling of power tools.
Guidelines for safe charging, storage, and handling of battery packs.
Information on proper servicing, repair, and use of replacement parts for the power tool.
Safe practices for blade depth, guard function, work support, and hand placement.
Understanding kickback causes and implementing preventative measures for safe operation.
Recommendations for PPE and precautions for battery handling, charging, and storage.
Precautions regarding the safe use of the laser guide, avoiding eye exposure.
Definitions of DANGER, WARNING, and CAUTION to understand risk levels.
Technical details including voltage, blade diameter, cutting depth, and no-load speed.
Description of major features like laser guides, bevel adjustment, depth adjustment, and hex key storage.
Steps for carefully unpacking the tool and checking for included items and shipping damage.
List of all components included in the package with the circular saw.
Detailed steps for safely installing and removing the circular saw blade.
Lists the types of cuts and materials the saw is designed for, including wood products.
Step-by-step instructions for inserting and removing the battery pack from the tool.
Understanding kickback causes and implementing preventative measures for safe operation.
Information on maintaining saw blades and the function of the lower blade guard system.
Instructions on how to safely start and stop the circular saw using the trigger and lock-off button.
Guide to adjusting the blade depth for optimal cutting and kickback prevention.
Instructions on activating and using the laser guides for accurate cutting alignment.
Best practices for handling the saw, supporting the workpiece, and proper cutting technique.
Methods for performing accurate cross cuts and rip cuts using or without the edge guide.
Instructions for setting and performing bevel cuts with the circular saw.
Details on checking and adjusting the 0° bevel stop and performing pocket cuts.
Step-by-step guide to realigning the front and rear laser beams for accurate cutting.
Guidelines for cleaning the tool using appropriate materials and methods.
Advice on maximizing battery life, proper storage, and responsible battery recycling.
Detailed list of all components with part numbers and quantities for the circular saw.
