Need help?Do you have a question about the Craftsman 113.29461 and is the answer not in the manual?
General| Model Number | 113.29461 |
|---|---|
| Type | Table Saw |
| Blade Diameter | 10 inches |
| Voltage | 120V |
| No Load Speed | 3450 RPM |
| Max Cut Depth at 90° | 3-1/8 inches |
Covers critical safety rules like grounding, guards, apparel, and workspace.
Guides for unpacking, mounting, and aligning the saw components.
Procedures for installing elevation crank, motor, carriage, and indicators.
Detailed steps for aligning the saw for accurate cuts.
Instructions for installing tables and squaring the blade.
Details motor specs and wiring for 120V/240V AC.
Identifies and explains the location and function of all controls.
Explains crosscutting, ripping, and their requirements.
Emphasizes key warnings regarding kickbacks, power, and adjustments.
Addresses looseness, squareness, and blade heel troubleshooting.
Troubleshoots smoking motors, slow speeds, and binding workpieces.
Specifies lubrication points and components that require none.
Provides diagrams and lists for identifying and ordering replacement parts.
To Next Page