Need help?Do you have a question about the Craftsman Accra-Arm 113.29440 and is the answer not in the manual?
Understand tool application, limitations, and potential hazards.
Ensure tools with three-prong plugs are connected to grounded receptacles.
Ensure all guards are in place and functional for safe operation.
Develop the habit of removing tools before turning on the power.
Avoid loose clothing or jewelry that could get caught in moving parts.
Always wear safety glasses or eye shields to protect against flying debris.
Disconnect power before servicing or changing accessories.
Addresses issues where the motor fails to start or operate.
Troubleshooting steps when the motor won't run and fuses blow.
Diagnosing and resolving issues with reduced motor power output.
Steps to address slow motor startup or failure to reach full speed.
Solutions for motor stalling and blown fuses/tripped breakers.
Addressing recurring issues with blown fuses or tripped circuit breakers.
Troubleshooting ripping problems, including smoking and motor stops.
Troubleshooting for squareness and repeatability of cuts.
To Next Page
General