To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 113.298032 and is the answer not in the manual?
Details how to connect the saw to a properly grounded power outlet.
Instructions for verifying the correct rotation direction of the motor before operation.
How to verify the saw blade is perpendicular to the table surface.
Instructions for securely attaching the saw unit to its assembled legs or bench.
Detailed procedure for aligning the rip fence parallel to the saw blade.
Guide for attaching the motor to the saw assembly.
Details the rip fence, its function, and how to use it for ripping cuts.
Explains the miter gauge, its use for crosscuts and angles, and locking mechanism.
Step-by-step guide for safely removing and installing the saw blade.
Detailed instructions on using the miter gauge for various cuts.
Explains the technique for crosscutting wood accurately with the miter gauge.
Explains how to cut wood lengthwise along the grain using the rip fence.
How to adjust the blade tilt for square (90°) cuts and check its alignment.
Addresses general operational issues and their potential causes and remedies.
Diagnoses and provides solutions for common motor-related problems.
General