Craftsman 113.29401 User Manual

Details the essential information needed when ordering repair parts.

Explains the service and support provided by Sears for the saw.

Comprehensive list of part numbers and descriptions for Figure 1 components.

Comprehensive list of part numbers and descriptions for Figure 2 components.

Comprehensive list of part numbers and descriptions for Figure 3 components.

Comprehensive list of part numbers and descriptions for Figure 4 components.

Details motor specs, thermal overload protector, and safety advice.

Guidelines for selecting appropriate wire gauges for safe power connection.

Instructions for securely attaching the radial arm saw to a workbench.

Steps for attaching the front table and ensuring it's parallel to the radial arm.

Steps to ensure the saw blade is perfectly perpendicular to the table.

How to adjust the column tube key to eliminate radial arm play.

Procedure to check and correct any heel in the saw blade alignment.

Steps for setting up the saw for a preliminary 0° cross-cut.

Instructions for safely removing and installing the saw blade.

Guides on raising, lowering, locking, and positioning the radial arm and motor.

How to adjust the rip scale indicators for accurate measurements.

Procedures to adjust the column tube key and yoke clamp handle for wear.

Instructions to adjust the carriage to eliminate play and ensure smooth movement.

Advice on proper attire, safe practices, and lubrication points.

Detailed instructions for executing cross-cutting cuts on the saw.

Guides for cutting with the grain in different yoke positions.

Instructions for cutting thick boards into thinner ones.

Instructions for making angled cuts and using dado heads for grooves.

Guides for specialized tasks including shaping, joinery, drilling, and sanding.

Information on using stabilizing washers and the saw's built-in brake.

Practical advice on table care, fence adjustments, tool usage, and cut quality.