Craftsman 113.29991 User Manual

OPERATING INSTRUCTIONS
AND PARTS LIST FOR
CRAFTSMAN BENCH SAW
10-INCH TILTING ARBOR
MODEL NUMBER i13.29991
The above Model Number will be found on a plate attached to your
saw, at the back, near the bottom of the base. Always mention the
Model Number when communicating with us regarding your saw or
when ordering parts.
HOW TO ORDER REPAIR PARTS
All parts listed herein may be ordered through Sears, Roebuck and Co.
o...... p_y,,o-.,e,_r° Limit._d. When ordering parts by mail from the mail
order house which serves the territory in which you live, selling prices
will be furnished on request or parts will be shipped at prevailing prices
and you will be billed accordingly.
WHEN ORDERING REPAIR PARTS, ALWAYS GIVE THE FOLLOW-
ING INFORMATION AS SHOWN IN THIS LIST:
1. The PART NUMBER 3. The MODEL NUMBER 113.29991
2. The PART NAME 4. The NAME of item--lO INCH BENCH SAW
COAST TO COAST NATION-WIDE
SERVICE FROM SEARS
FOR YOUR CRAFTSMAN BENCH SAW
SEARS, ROEBUCK AND CO. and
SIMPSONS-SEARS LIMITED in Canada
back up your investment with quick,
expert mechanical service and genu-
ine CRAFTSMAN replacement parts.
If and when you need repairs or serv-
ice, call on us to protect your invest-
ment in this fine piece of equipment.
SEARS, ROEBUCK AND CO.- U. S. A.
IN CANADA, SIMPSONS-SEARS LIMITED
Printed in U.S.A.

Craftsman 113.29991 Specifications

General

Brand	Craftsman
Model	113.29991
Category	Saw
Language	English

Summary

OPERATING INSTRUCTIONS AND PARTS LIST FOR CRAFTSMAN BENCH SAW 10-INCH TILTING ARBOR

Instructions for Assembling and Operating Your Saw

Assembling and Adjusting the Saw

Instructions for assembling and adjusting the saw parts after uncrating.

Align Saw Blade with Table Grooves

Procedure to ensure the saw blade is parallel to table grooves.

Install Rip Fence

Steps to attach the rip fence and rack to the saw table.

Adjust Rip Fence Parallel to Blade

How to ensure the rip fence is perfectly parallel to the saw blade.

Adjusting Stop Collars

Mounting the Motor

Motor Pulley Caution

Operating Controls

Description of the saw's various operating controls and their functions.

Operating Adjustments

Adjusting Tilt Gage

Lubrication

Proper Operating Procedures

Essential safety and operational guidelines for using the saw.

Standard Saw Operations

Detailed guide on performing common sawing operations.

Ripping Operations

How to rip wood with the grain using the fence guide.

Resawing Operations

Crosscutting Operations

How to cut wood across the grain using the miter gage.

Bevel and Miter Cuts

Using the Dado Head