To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 113.299315 and is the answer not in the manual?
General| Model Number | 113.299315 |
|---|---|
| Type | Table Saw |
| Blade Diameter | 10 inches |
| Blade Size | 10 inches |
| Voltage | 120V |
| No Load Speed | 5000 RPM |
| Arbor Size | 5/8 inch |
Defines DANGER, WARNING, CAUTION terms for hazard communication.
Essential checks and preparations before initial operation.
Guidelines for personal safety equipment and attire.
Steps to prevent unintentional power-up of the saw.
Specific safety advice for ripping operations.
Safety guidelines for crosscutting operations.
Instructions for grounding and plug usage.
Ensuring the rip fence is parallel to the blade.
Wiring the motor to the power source and switch.
Explains the operation and safety features of the switch.
Procedures for safely changing the sawblade.
Pre-operation checks for saw and work area.
Strategies for safe cutting operations and workpiece handling.
Precautions to take while the blade is in motion.
How to use the rip fence for parallel cuts.
Specific safety guidelines for ripping operations.
The process of cutting along the length of wood.
Ensuring the blade is parallel to table grooves for safe operation.
Adjusting blade for 90° or 45° cuts and overall squareness.
Sharpening the anti-kickback pawls for effective operation.
