To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 113.299131 and is the answer not in the manual?
Learn tool application, limitations, and specific potential hazards.
Ensure proper grounding via 3-conductor cord and plug.
Maintain safety guards in proper working order.
Critical warnings about power connection and tool disconnection before use.
Detailed advice on understanding causes and implementing methods to prevent kickbacks.
Recommendations on clothing, gloves, and eye/ear protection.
Guidelines for table inserts, freehand cuts, and general operator alertness.
Calibrating the 0° and 45° tilt stops for accurate angle cuts.
Adjusting the 45° tilt position and aligning the saw blade to table grooves.
Checking and ensuring the rip fence is parallel to the table groove.
Verifying and adjusting the rip fence's self-correcting alignment.
Proper installation and accuracy checks for the rip fence.
Step-by-step guide for adjusting the rip fence for accuracy.
Troubleshooting for motor binding, burning, or stalling during ripping.
Solutions for blade alignment issues and kickbacks.
Diagnosing and resolving problems with motor power and speed.
Addressing motor overheating and starting relay issues.
Troubleshooting motor stalls and frequent fuse or breaker openings.
General