Craftsman 113.29350 User Manual

ASSEMBLY, OPERATING INSTRUCTIONS
AND PARTS LIST FOR
CRAFTSMAN 9 INCH RADIAL SAW
1
MODEL NUMBER 113.29350
The Model Number will be found on a plate attached to your saw,
at the left side of the base. Always mention the Model Number in
all correspondence regarding the CRAFTSMAN RADIAL SAW or when
ordering repair parts.
Carefully read the instructions provided, observe the simple
safety precautions and you will have many hours of satisfactory
use from your new Craftsman tool.
HOW TO ORDER REPAIR PARTS
All parts listed herein may be ordered through SEARS, ROEBUCK AND
CO. or SIMPSONS-SEARS LIMITED. When ordering parts by mail from
the catalog order house which serves the territory in which you live,
selling prices will be furnished on request or parts will be shipped at
prevailing prices and you will be billed accordingly.
WHEN ORDERING REPAIR PARTS, ALWAYS GIVE THE FOLLOWING
INFORMATION AS SHOWN IN THIS LIST:
1. The PART NUMBER 3. The MODEL NUMBER 113.29350
2. The PART NAME 4. The NAME of item--RADIAL SAW
COAST TO COAST NATION-WIDE
SERVICE FROM SEARS
FOR YOUR CRAFTSMAN RADIAL 5AW
SEARS, ROEBUCK AND CO. and
SIMPSONS-SEARS LIMITED in Canada
back up your investment with quick,
expert mechanical service and genu-
ine CRAFTSMAN replacement parts.
If and when you need repairs or serv-
ice, call on us to protect your invest-
ment in this fine piece of equipment.
SEARS, ROEBUCK AND CO.-U.S.A.
IN CANADA, SIMPSONS-SEARS LIMITED
Printed in U S. A.
Part No. 63152

Craftsman 113.29350 Specifications

General

Brand	Craftsman
Model	113.29350
Category	Saw
Language	English

Summary

Ordering Repair Parts

Information Required for Parts Orders

Details needed when ordering replacement parts for the radial saw.

Power Tool Safety Guidelines

Manual Reading and Tool Inspection

Emphasizes reading the manual and thoroughly inspecting the power tool before use.

Proper Attire and Personal Safety

Advice on dressing appropriately and maintaining personal safety during operation.

Electrical Connections and Safe Operation

Guidance on electrical connections and essential safe operating practices.

Connecting Motor to Power Supply

Motor Specifications and Safety

Details on motor specifications, thermal overload protection, and safety precautions.

Recommended Wire Sizes

Guidelines for selecting appropriate wire sizes for power connections to ensure safe operation.

Saw Mounting and Alignment Procedures

Installing the Front Table Board

Step-by-step instructions for attaching the front table board to the saw base.

Eliminating Radial Arm Side Play

Procedure to remove looseness and ensure stability of the radial arm.

Squaring the Cross-Cut Travel

Steps to align the saw blade for accurate cross-cutting.

Table Leveling and Alignment

Leveling Table Parallel to Radial Arm

Instructions for ensuring the saw table is perfectly level relative to the radial arm.

Saw Blade Squaring and Indexing

Squaring Saw Blade to Table Top

Procedure to make the saw blade perpendicular to the table surface.

Setting Bevel Indicator to Zero

Adjusting the bevel indicator to ensure accurate angle readings.

Saw Blade Alignment Checks

Checking Saw Blade for Heel Condition

Method for identifying and correcting blade misalignment (heel).

Double-Checking Saw Squaring

Re-performing alignment steps to ensure overall saw accuracy.

Preliminary Cross-Cut Setup

Preparing the saw for the initial cross-cut groove on the table.

Operating Controls and Radial Arm Movement

Understanding Operating Controls

Explanation of the various controls for operating the radial arm saw.

Adjusting and Securing the Radial Arm

Instructions for adjusting and securing the radial arm's position.

Radial Arm and Yoke Clamp Adjustments

Adjusting Radial Arm Index Position

Procedure to correctly position and lock the radial arm at index points.

Aligning Yoke Clamp Arm

Method for ensuring the yoke clamp arm is parallel to the radial arm.

Carriage Adjustment and Setup Guide

Adjusting Carriage Looseness

Steps to check for and correct play in the saw's carriage.

Interpreting the Set-Up Guide System

Explanation of the color-coded system for identifying operating controls.

Safety Instructions and Lubrication

General Safety Precautions

Essential safety advice for operating the radial saw.

Lubrication Points and Procedures

Guidance on where and how to lubricate the saw for optimal performance.

Standard Saw Operations

Performing Cross-Cuts

Instructions for making accurate cross-cutting operations.

Ripping Wood with the Grain

Procedure for ripping wood safely and effectively.

Specialized Saw Operations

Resawing Thick Boards

Techniques for cutting thick boards into thinner pieces.

Making Bevel and Miter Cuts

How to perform angled cuts using the radial arm saw.

Using the Dado Head for Grooves

Instructions for cutting grooves and dados with the dado head attachment.

Advanced Operations and Helpful Hints

Routing, Boring, and Sanding

Methods for performing routing, boring, and sanding tasks with the saw.

Tabletop Maintenance and Fence Adjustments

Tips for maintaining the saw table and adjusting the rip fence.

Auxiliary Table and Troubleshooting Reference

Constructing an Auxiliary Table Top

Instructions for building an optional auxiliary table for shaping operations.

Troubleshooting Charts Reference

Information directing users to troubleshooting charts for problem resolution.

Saw Troubleshooting Chart

Blade Alignment and Cutting Issues

Solutions for common problems related to blade alignment and cut accuracy.

Motor and Elevation Crank Problems

Troubleshooting steps for motor and elevation crank operational issues.

Motor Troubleshooting Chart

Motor Start and Power Issues

Diagnosing and resolving problems with the motor not starting or losing power.

Motor Overheating and Stalling

Solutions for motor overheating, slow starting, or stalling issues.

Parts List - Figure 37

Component Breakdown for Radial Saw

List of parts with key numbers, part numbers, and descriptions for figure 37.

Diagram of Saw Components - Figure 37

Parts List - Figure 38

Detailed Parts Identification

List of parts with key numbers, part numbers, and descriptions for figure 38.

Diagram of Saw Components - Figure 38

Parts List - Figure 39

Component Breakdown for Saw Assembly

List of parts with key numbers, part numbers, and descriptions for figure 39.

Parts List - Figure 40 (Motor Assembly)

Motor Assembly Component List

List of parts with key numbers, part numbers, and descriptions for figure 40.