Need help?Do you have a question about the Craftsman 113.24201 and is the answer not in the manual?
Read manual, learn applications, limitations, and specific potential hazards peculiar to this tool.
Use 3-conductor cord and grounding type receptacle. Never connect green wire to live terminal.
Ensure guards are in place and in working order.
Check for and remove all keys and wrenches before turning on.
Avoid loose clothing, jewelry. Wear rubber-soled footwear.
Comply with ANS Z87.1-1968. Use face/dust mask if dusty.
Use clamps or a vise for safer operation and free hands.
Ensure switch is "OFF" before plugging in.
Check for proper operation and alignment of damaged parts.
Warning to completely assemble, install, read and understand instructions before operating.
Specific advice on protective gear and avoiding hazardous hand positions.
Shut off power and replace damaged/failed parts before resuming operation.
Critical safety warnings including reading manual, wearing goggles, blade installation, and guide adjustment.
Instructions for proper grounding and outlet connection to prevent shock.
Step-by-step guide to securely attach the band saw to a floor base.
Steps for mounting the belt guard support bracket to the motor.
Verifying the correct counterclockwise motor rotation before power connection.
Steps for fitting the blade tension knob, removing the guard, and preparing for blade installation.
To Next Page
General