Craftsman 113.248340 User Manual

f
Save This Manual
For Future Reference
ModeJ No.
113.248340
Single Speed Band Saw
with Leg Set
Serial
Number
Model and serial numbers
may be found at the rear of
the base.
You should record both
model and serial number in
a safe place for future use.
FOR YOU
SAFETY
READ ALL
INSTRUCTmONS
CAREFULLY
14 iNCH D SAW
• assembly
• operating
, repair parts
1\
Sold by SEARS, ROEBUCK AND CO., Hoffman Estates, IL. 60179 U.S.A.
Part No. SP5836
Y
Printed in Taiwan

Craftsman 113.248340 Specifications

General

Type	Table Saw
Motor Power	1.5 HP
Blade Diameter	10 inches
Table Size	20 x 26 inches
Voltage	120V
Max Cut Depth at 90°	3 inches
Rip Capacity	24 inches
No Load Speed	5000 RPM
Amps	15 Amps

Summary

FOR YOUR SAFETY

Safety Instructions For Band Saw

Safety Signal Words

Defines DANGER, WARNING, and CAUTION terms used in safety instructions.

Before Using The Saw

Details essential steps before plugging in and operating the saw for the first time.

When Installing Or Moving The Saw

Provides guidance on safe installation and movement to prevent injury.

Before Each Use

Outlines necessary checks and inspections before operating the band saw.

Dress for Safety

Motor Specifications and Electrical Requirements

Power Supply & Motor Specs

Details the electrical requirements and specifications of the saw's motor.

Motor Safety Protection

Information on protecting the motor from damage and ensuring safe operation.

Unpacking and Checking Contents

Assembly Overview

Assemble Leg Set

Mount Saw to Leg Set

Adjust Leveling Feet

Mount the Motor

Mount Trunnion Support

Mount the Table

Band Saw Components

Blade Adjustment Controls

Alignments & Adjustments

Blade Replacement Guide

Comprehensive guide on safely removing and installing a new saw blade.

Adjust Blade Tension

Adjust Blade Tracking

Adjust Upper Blade Guides

Upper Guides & Bearing Adjustment

Lower Guides & Bearing Adjustment

Basic Saw Operation Modes

Tool Maintenance

General Troubleshooting

Motor Troubleshooting