To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 113.244501 and is the answer not in the manual?
Guidelines for safe installation and movement, covering environmental and electrical shock hazards.
Guidance on appropriate attire, eye protection, and hearing protection for safe band saw operation.
Steps for handling jammed material, backing up workpieces, and securing the saw before leaving.
Details the motor specifications including RPM, voltage, frequency, and phase for the band saw.
Instructions for safely connecting the band saw to a grounded power outlet, including adapter use.
Detailed steps for securely fastening the band saw to a workbench using screws and washers.
Instructions to power off, remove the key, and unplug the saw before installing the blade.
Steps to loosen and retract upper and lower blade guide supports and back-up bearings.
Detailed steps for applying the correct tension to the band saw blade using the tension assembly.
Steps to adjust the tracking screw to ensure the blade runs centered on the upper wheel.
Procedure for adjusting the back-up bearings to be close to the blade without touching.
How to adjust the blade guide supports so guides are just behind the blade's gullets.
Instructions for cleaning tires, the saw interior, and applying wax to the table for smooth operation.
Troubleshooting steps for when the motor won't run or the blade doesn't track properly.
Solutions for band saw slowing down during cuts or blades breaking unexpectedly.
Addressing noisy operation, blades not cutting straight, and guides not staying in position.
General