To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 113.244530 and is the answer not in the manual?
General| Model Number | 113.244530 |
|---|---|
| Type | Table Saw |
| Blade Diameter | 10 inches |
| Motor Power | 1.5 HP |
| Weight | Approximately 70-80 lbs (depending on configuration) |
| Motor | Induction |
| Arbor Size | 5/8 inch |
| Voltage | 120V |
| No Load Speed | 3450 RPM |
| Max Cut Depth at 90° | 3 inches |
Steps and warnings before powering on the saw.
Safety for installation, transport, and electrical connections.
Pre-operation checks and safety procedures.
Understanding saw functions and planning safe cutting.
Safety during assembly/setup and preventing unexpected power-up.
Appropriate clothing and personal protective equipment.
Procedures for safely shutting down and securing the saw.
Definitions of woodworking and band saw terminology.
Securing the saw to a workbench.
Steps to attach the saw table.
Procedure for fitting the saw blade.
Adjusting the blade tension.
Aligning blade and adjusting guides/bearings.
Completing table installation and aligning it.
Attaching clip for dust collection.
Selecting blade and speed for materials.
Precautions against jams, slips, and thrown pieces.
Safety checks before starting.
Keeping the saw clean.
Motor, electrical, lubrication, brushes, and belt care.
