Craftsman 113.244510 User Manual

SAVE TH_S MANUAL
FOR FUTURE
REFERENCE
Serial
Number
Model and serial
number may be found
at the right-hand side
of the frame.
You should record both
model and serial
number in a safe place
for future use.
CAUTION:
Read GENERAL and
ADDiTiONAL SAFETY
iNSTRUCTiONS
carefully
IO.INCH
SA
ECT
* assembly
. operating
o repair parts
IVE
Sold by SEARS, ROEBUCK AND CO., Chicago, IL. 60684 U.S.A.
Part No. 69182

Craftsman 113.244510 Specifications

General

Brand	Craftsman
Model	113.244510
Category	Saw
Language	English

Summary

General Safety Instructions for Power Tools

Essential Safety Guidelines

Detailed safety instructions covering tool knowledge, grounding, workspace, apparel, and operational safety practices.

Additional Safety Instructions for Band Saw

Specific Band Saw Operational Safety

Specific safety procedures for band saw use, including handling, guards, blade management, and workpiece control.

Motor Specifications and Electrical Requirements

Power Supply and Grounding

Assembly

Mounting the Band Saw to Workbench

Replacing the Band Saw Blade

Tensioning the Band Saw Blade

Instructions for setting the correct blade tension using the tension adjusting knob.

Tracking the Band Saw Blade

Procedure for aligning the blade to run true on the wheels using the tracking adjustment screw.

Aligning the Table Square to Blade

Adjusting Blade Guides and Bearings

Guide to setting upper/lower blade guides and thrust bearing for proper blade support.

Basic Band Saw Operation

Curve Cutting Techniques

Sawing Procedures

Troubleshooting

Common Problems and Solutions

Repair Parts