To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 113.248320 and is the answer not in the manual?
General| Model Number | 113.248320 |
|---|---|
| Type | Table Saw |
| Blade Diameter | 10 inches |
| Voltage | 120V |
| Amps | 13 A |
| Table Size | 20 x 26 inches |
| Max Cut Depth at 90° | 3 inches |
| Rip Capacity | 24 inches |
| No Load Speed | 5000 RPM |
Essential safety guidelines for operating power tools safely.
Specific safety precautions for band saw operation and use.
Definitions of common woodworking terms used in the manual.
Information on power supply, wiring, and grounding for the band saw.
Overview of the manual's scope and model compatibility.
Steps for safely unpacking and verifying all parts are present.
Instructions for attaching leveling feet to the saw's leg set.
Steps for assembling the leg stand to the main saw unit.
Detailed instructions for assembling the cabinet for Model 113.248510.
Procedure for securely attaching the band saw unit to its cabinet.
Instructions for mounting the cabinet door with hinges and catch.
How to install the handwheel mechanism for saw adjustments.
Step-by-step guide for installing the saw's motor.
Wiring instructions for connecting the motor to the power supply.
Guidance on choosing the appropriate blade speed for different operations.
Procedure for adjusting the band saw's belt speed settings.
How to install the plastic trim caps on the saw's corners.
Identification and function of major controls and components.
Explanation of the electronic display and its features.
How to use the digital system for angle, tension, and speed.
Step-by-step process for correctly installing the saw blade.
Critical steps for blade alignment and guide adjustments for optimal performance.
Procedure for attaching the front table to the saw.
How to ensure the blade is perfectly perpendicular to the table.
Steps to level and align the front table with the rear table.
Instructions on how to adjust the saw head for angled cuts.
How to adjust the bevel lock mechanism for proper holding force.
Fundamental techniques for operating the band saw for various cuts.
Steps to attach the sanding platen and belt.
Routine cleaning, lubrication, and upkeep for the band saw.
Common problems and their solutions for the band saw.
Diagnosing and resolving issues related to the saw's motor.
Troubleshooting for the electronic indicator system on specific models.
Information on ordering replacement parts for the band saw.
Contact information and procedures for obtaining service.
Guidance on providing necessary information when ordering parts.
