Craftsman C459.60410 User Manual

27
SERVICE AND MAINTENANCE
PARKING BRAKE ADJUSTMENT
WARNING
Never attempt to adjust the brakes while the engine is running. Always
disengage PTO (Blade Engage Lever), move shift lever into neutral
position, stop engine and remove key to prevent unintended starting.
If the tractor does not come to a complete stop when the clutch-brake
pedal is completely depressed, or if the tractor’s rear wheels can roll
with the parking brake applied, the brake is in need of adjustment.
Contact the nearest Parts & Repair Service Center to have your
brakes serviced.
To locate the nearest Parts & Repair Service Center or to schedule
service, contact 1-800-4-MY-HOME®.
CHANGING THE TRANSMISSION DRIVE
BELT
NOTE: Several components must be removed and special tools (i.e.
air/impact wrench) in order to change the tractor’s drive belt. Contact
the nearest Parts & Repair Service Center to have your transmis-
sion drive belt serviced.
To locate the nearest Parts & Repair Service Center or to schedule
service, contact 1-800-4-MY-HOME®.

Craftsman C459.60410 Specifications

General

Engine	Briggs & Stratton
Engine Type	4-Cycle
Cutting Positions	6
Deck Material	Steel
Mulching Capability	Yes
Side Discharge	Yes
Starter Type	Recoil
Oil Capacity	20 oz
Cutting Height	1.25-3.75 inches
Wheel Size	7 inches (front)