To Next PageTo Next Page
Need help?Do you have a question about the Craftsman CMCCS610 and is the answer not in the manual?
General| Type | Cordless Chainsaw |
|---|---|
| Power Source | Battery |
| Voltage | 20V |
| Tool-Free Chain Tensioning | Yes |
| Battery Included | Yes |
| Bar Length | 16 inches |
| Chain Pitch | 3/8 in |
| Chain Gauge | 0.050 inches |
Identifies the power switch for the chainsaw.
Describes the lever that prevents accidental starting.
Structural barrier for hand safety during operation.
Supports and guides the saw chain during cutting.
The cutting element of the chainsaw.
Protects the drive sprocket and chain.
The power source for the cordless chainsaw.
Secures the guide bar to the chainsaw body.
Adjusts the tension of the saw chain.
Access point for the chain oil reservoir.
Shows the current level of chain oil.
Cover for protecting the guide bar when not in use.
The rear grip for operating the chainsaw.
The front grip for operating the chainsaw.
Enclosure for the battery pack.
Mechanism to remove the battery pack.
Tool for chain tensioning and adjustments.
Specifies the designed purpose and limitations of the tool.
Explains hazard symbols and their meanings for injury prevention.
Guidelines for maintaining a safe operating environment.
Critical safety rules related to power source and electrical hazards.
Recommendations for operator safety during use.
General advice on using and caring for power tools.
Specific instructions for handling and maintaining battery-powered tools.
Guidance on when and how to service the power tool.
Additional safety precautions directly for chainsaw operation.
Explains kickback causes and how operators can avoid it.
Lists precautions to follow to reduce kickback occurrences.
Details features designed to reduce kickback hazards.
Defines key parts and operational terms for the chainsaw.
Essential safety guidelines for all battery packs.
Precautions for charging and using battery packs safely.
Recommendations for storing battery packs and chargers.
Instructions for cleaning battery packs and using the fuel gauge.
Guidelines for transporting batteries and recycling information.
Critical safety rules for operating battery chargers.
Procedures for cleaning and mounting the battery charger.
Information on using the VersaTrack™ accessory system.
Step-by-step guide to attaching the bar and chain.
How to properly set and maintain chain tension.
Instructions for swapping out the saw chain.
Details the auto oiling system for lubrication.
Steps for inserting and removing the battery.
Correct hand placement for safe chainsaw control.
How to use the ON/OFF switch and trigger.
Introduces various cutting methods.
Procedures and safety for cutting down trees.
How to cut felled trees or logs into manageable lengths.
Removing branches from a felled tree.
Information on compatible accessories and the mounting system.
Guidelines for cleaning and maintaining the tool.
Instructions for maintaining the cutting components.
Information on where and how to get the tool serviced.
Reasons and process for registering the product.
Details of the product's warranty coverage and guarantees.
Lists compatible battery packs and chargers for the tool.
