To Next PageTo Next Page
Need help?Do you have a question about the Craftsman CMECSP610 and is the answer not in the manual?
General| Type | Electric |
|---|---|
| Bar Length | 16 inches |
| Chain Type | Low kickback |
| Chain Pitch | 3/8 in |
| Chain Gauge | 0.050 inches |
| Amperage | 12 Amps |
General advice on maintaining a clean and safe workspace.
Precautions for safe use of electrical power tools.
Guidelines for operator safety and protective equipment.
Instructions on proper usage and maintenance of power tools.
Instructions for servicing the power tool with qualified personnel.
Essential safety rules for electrical shock prevention and general operation.
Precautions and techniques to minimize the risk of kickback.
Correct hand placement for safe and controlled pole saw operation.
Critical safety advice for operating the pole saw safely.
General guidance on pruning trees safely and effectively with the pole saw.
Specifies mandatory safety gear and certifications for safe tool operation.
Step-by-step guide for attaching the guide bar and saw chain.
How to properly set and check the tension of the saw chain.
Explanation of the automatic lubrication system for the saw chain and guide bar.
Instructions on how to refill the oil reservoir for the auto oiling system.
Correct hand placement for safe and controlled chainsaw operation.
Process of cutting down a tree safely and effectively.
Removing branches from a fallen tree.
Cutting a felled tree or log into lengths.
Steps to separate the chainsaw from the extension pole assembly.
How to separate the extension pole from the handle assembly.
Instructions for turning the pole saw on and off using the switch.
Detailed guide on how to prune trees safely with the pole saw.
How to sharpen the saw chain for optimal performance and safety.
Information about the Versatrack™ accessory system.
