To Next PageTo Next Page
Need help?Do you have a question about the Craftsman CMP21PL and is the answer not in the manual?
Instructions for connecting the air supply to the tool.
Information about the tool's air fitting and adapter.
Steps for installing an air fitting to the tool.
Guidelines for setting and maintaining optimal operating pressure.
Requirements for air hoses used with the tool.
Demonstrates the correct way to hold the tool for safe operation.
Step-by-step instructions for loading fasteners into the magazine.
Details the single sequential trigger mode for accurate placement.
Details the contact actuation trigger mode for rapid fastening.
General instructions for actuating the tool and safety precautions.
Procedure to switch between sequential and contact actuation modes.
How to adjust the exhaust deflector to direct air away from the operator.
Information on the no-mar pad for surface protection and grip.
Details on compatibility with the Versatrack system.
General
