To Next PageTo Next Page
Need help?Do you have a question about the Craftsman CMXEOCG572 and is the answer not in the manual?
Instructions for mounting the header bracket to the wall above the garage door, ensuring secure structural attachment.
Instructions for mounting the header bracket to the ceiling, detailing placement and secure fastening to structural supports.
Steps for positioning the opener unit for sectional or tracked one-piece doors, using a 2x4 for alignment.
Steps for positioning the opener unit for one-piece doors without tracks, using a 2x4 for alignment.
Steps for fastening the door bracket to sectional garage doors, including reinforcement for lightweight doors.
Instructions for fastening the door bracket to one-piece garage doors, covering metal and wood door types.
Guide for connecting the door arm sections to the trolley and door bracket for sectional doors.
Key information and warnings regarding the proper installation and function of safety reversing sensors.
Methods for installing safety reversing sensor brackets: garage door track, wall, or floor installation.
Detailed steps for mounting and wiring the safety sensors using pre-wired or non-pre-wired installation methods.
Instructions for connecting the safety sensor wires to the garage door opener's quick-connect terminals.
Comprehensive safety warnings and guidelines for operating the garage door opener safely to prevent severe injury or death.
Chart correlating UP/DOWN arrow flashes to symptoms and providing troubleshooting solutions for opener issues.
Guidance on safe operation and maintenance to prevent accidents and ensure proper functioning of the opener.
Methods for testing the opener's safety reversal features, including contact tests and sensor checks.
Instructions for mounting the header bracket to the wall above the garage door, ensuring secure structural attachment.
Instructions for mounting the header bracket to the ceiling, detailing placement and secure fastening to structural supports.
Steps for positioning the opener unit for sectional or tracked one-piece doors, using a 2x4 for alignment.
Steps for positioning the opener unit for one-piece doors without tracks, using a 2x4 for alignment.
Steps for fastening the door bracket to sectional garage doors, including reinforcement for lightweight doors.
Instructions for fastening the door bracket to one-piece garage doors, covering metal and wood door types.
Guide for connecting the door arm sections to the trolley and door bracket for sectional doors.
Key information and warnings regarding the proper installation and function of safety reversing sensors.
Methods for installing safety reversing sensor brackets: garage door track, wall, or floor installation.
Detailed steps for mounting and wiring the safety sensors using pre-wired or non-pre-wired installation methods.
Instructions for connecting the safety sensor wires to the garage door opener's quick-connect terminals.
Comprehensive safety warnings and guidelines for operating the garage door opener safely to prevent severe injury or death.
Chart correlating UP/DOWN arrow flashes to symptoms and providing troubleshooting solutions for opener issues.
Guidance on safe operation and maintenance to prevent accidents and ensure proper functioning of the opener.
Methods for testing the opener's safety reversal features, including contact tests and sensor checks.
General| Type | Garage Door Opener |
|---|---|
| Horsepower | 1/2 HP |
| Drive Type | Chain Drive |
| Max Door Height | 7 feet |
| Remote Control | Yes |
| Power Source | 120V AC |
| Number of Remotes Included | 2 |
| Wall Console | Yes |
| Battery Backup | No |
| Smart Home Compatibility | No |
| Safety Features | Safety Sensors |
| Max Door Weight | 500 lb |
