7
ENGLISH
NOTICE: Use threaded sealant tape (not
included) on the threading of the male
plug.
PREPARATION
ASSEMBLY
Estimated Assembly Time: 1 – 3 minutes
Before beginning the assembly of the product, make sure all parts are present. Compare parts
with package contents list and hardware contents list. If any part is missing or damaged, do
not attempt to assemble the product.
Tools Required for Assembly (not included):
• 9/16 in. (14 mm) or adjustable wrench
• Thread sealant tape
• Tool oil
• Male plug
1. Remove plastic air inlet protective cap
from air inlet .
3. Place 2-3 drops of air tool oil (not
provided) into the male plug
before each use.
7
2. Tighten male plug (not included),
turning clockwise with a wrench (not
included) for air tight connection.
DO NOT OVERTIGHTEN.
7
To Next Page
Loading...
Need help?
General