To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 113.225930 and is the answer not in the manual?
Critical warning about operating the machine only after complete assembly and understanding instructions.
Step-by-step guide for assembling the steel leg stand for Model 113.225930.
Instructions for attaching the sander unit to the steel leg set.
Steps for mounting and positioning the work table.
Procedure for installing, tensioning, and tracking the abrasive belt.
How to adjust the belt to track properly on the pulleys.
Instructions for attaching the belt dust trap.
Guide for installing the backstop for support during sanding operations.
Techniques for flat surface finishing on the abrasive belt.
How to finish ends of long workpieces with the belt vertical.
Finishing outside curves on the belt and inside curves on the idler pulley.
Techniques for finishing small surfaces and curves on the disc.
Details lubrication requirements for bearings, pulleys, and motor.
A guide to diagnose and resolve common operating issues with the sander.
A comprehensive list of all sander parts with key numbers and descriptions.
General