To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 113.225941 and is the answer not in the manual?
Defines DANGER, WARNING, CAUTION terminology and outlines initial setup steps.
Checks to perform before operating and advice on work planning.
Recommendations for clothing, safety goggles, and workspace safety.
Guidance on preventing workpiece kickback during operation.
Rules for running, leaving, and precautions for sanding metals and paint.
Proper grounding, outlet usage, and electrical connection guidelines.
Guidelines for selecting extension cords and verifying motor spin direction.
List of tools required for assembling the sander.
Steps for unpacking the sander and verifying all parts are present.
Securing the main sander body to the assembled leg structure.
Connecting the drive belt and installing the power switch assembly.
Instructions on how to safely operate the on/off switch.
Attaching the work table and adjusting its angle and position.
Fitting the abrasive belt and adjusting its tension and tracking.
Explanation of the belt adjustment knob and tension lever functions.
Fine-tuning the work table's angle and position relative to the disc.
Locking the backstop and adjusting the table stop for leveling.
Reiteration of electrical safety rules and potential hazards.
Essential checks before operation and planning your work.
Guidance on appropriate clothing, eye protection, and workspace.
Methods to prevent workpiece kickback and ensure safe feeding.
Rules for running the sander, leaving it, and handling materials.
Techniques for sanding flat surfaces on the abrasive belt.
Methods for sanding ends and curved edges on the belt.
Instructions for keeping the machine and workshop clean.
Care and lubrication procedures for the sander's motor.
List of optional accessories and guidelines for their use.
Diagnosing and fixing motor noise and power output problems.
Diagnosing issues with the switch, motor stalling, and belt tracking.
General