To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 113.226431 and is the answer not in the manual?
Steps to take before operating the sander, including assembly and learning controls.
Safety precautions for handling the sander, including environment and securing the tool.
Pre-operation checks and inspections for damaged parts and proper function.
Protective equipment, dress code, and workspace environment safety guidelines.
Safety precautions to follow while the sander is running, including handling workpieces.
Post-operation safety and securing the tool, including unplugging and removing the key.
Proper electrical connection and grounding procedures for safe operation.
List of tools required for assembly and initial setup of the sander.
Checklist of all parts supplied with the sander against the table of loose parts.
Methods for securely attaching the sander to a workbench.
Steps for attaching the sanding disc and protective guard to the unit.
Attaching the work support and the main worktable components.
Adjusting table position and ensuring proper clearance from the sanding surface.
Adapting the sander for vertical belt sanding operations.
Ensuring the worktable is at a 90-degree angle to the sanding disc.
Procedures for fitting, tensioning, and aligning the sanding belt for optimal performance.
Overview of the main parts and their functions on the sander.
Detailed steps for using the locking on-off switch safely.
Essential checks and safety preparations before using the sander.
Guidelines for protective gear and workspace environment for safe operation.
Key safety rules and practices to follow while operating the sander.
How to adjust the worktable for angled sanding.
Adjusting the belt bed between horizontal and vertical positions.
Techniques for surface, end, and curved edge sanding.
Techniques for sanding small end surfaces on the disc.
Procedure for lubricating the sleeve bearings with oil.
Accessing, tensioning, and replacing the drive belt.
Solutions for common problems encountered with the sander.
List of recommended optional accessories for the sander.
Visual illustration of all parts with corresponding key numbers.
Detailed list of all parts with their numbers and descriptions.
Instructions and information needed for ordering replacement parts.
General