To Next PageTo Next Page
Need help?Do you have a question about the Craftsman 113.226423 and is the answer not in the manual?
General| Model Number | 113.226423 |
|---|---|
| Type | Belt/Disc Sander |
| Disc Diameter | 6 inches |
| Speed | 3450 RPM |
| Belt Size | 4 x 36 inches |
Read and understand the owner's manual and labels affixed to the tool.
Ensure the tool is equipped with a 3-conductor cord and a 3-prong grounding type plug.
Keep guards in proper working order, adjustment, and alignment.
Avoid loose clothing, gloves, neckties, or jewelry; wear protective hair covering.
Always wear safety goggles complying with ANSI Z87.1.
Ensure the switch is in the 'OFF' position before plugging in.
Serious injury could occur if the tool is tipped or accidentally contacted.
Carefully check damaged guards or parts for proper function before use.
Turn power off and wait for the tool to stop completely before leaving.
Wear safety goggles, face shield, ear plugs; avoid loose clothing and tie back hair.
DANGER warnings for reading manual, wearing protection, and workpiece support.
Instructions for grounding, using proper outlets, and extension cords.
Instructions for securely fastening the sander to a workbench surface.
Detailed steps for installing and tensioning the timing belt.
Identifies causes and remedies for a non-operational motor.
Troubleshoots issues related to the machine slowing during operation.
Addresses problems with the sanding belt not tracking properly.
Diagnoses and resolves issues causing wood to burn during sanding.
