Craftsman E410 - User Manual

40 pages

Save Page as PDF

To Next Page

To Next Page

Loading...

769-22870 / 01 11/19

OPERATOR’S MANUAL | MANUAL DEL OPERADOR

E410

CMXGKAME3079

1-888-331-4569 WWW.CRAFTSMAN.COM

IF YOU HAVE QUESTIONS OR COMMENTS, CONTACT US.

SI TIENE DUDAS O COMENTARIOS, CONTÁCTENOS.

ELECTRIC START CAPABLE 4-CYCLE GAS LAWN EDGER

BORDEADORA DE CÉSPED DE GAS DE 4 TIEMPOS CON CAPACIDAD PARA ARRANQUE

ELÉCTRICO

Questions and Answers

T
trevorclarkJul 30, 2025
How to start a Craftsman E410 that won't start?
- D
  Douglas PetersonJul 30, 2025
  If your Craftsman Lawn Mower engine won't start, it might be due to several reasons. First, ensure the fuel tank is filled with fresh fuel. If the primer bulb wasn't pressed enough, try pressing it 10 times. Old fuel (over 30 days) can also be a culprit; in this case, drain the tank and add fresh fuel. A fouled spark plug should be replaced. In case the engine is hot, refer to the 'IF... THE ENGINE IS HOT' instructions in the Starting and Stopping section.
B
Brandon SanchezAug 5, 2025
Why does my Craftsman Lawn Mower engine lack power or stalls?
- L
  Linda PriceAug 6, 2025
  If your Craftsman Lawn Mower engine lacks power or stalls, the possible causes include old fuel (over 30 days), a dirty air filter, or a fouled spark plug. To resolve this, drain the fuel tank and add fresh fuel, clean or replace the air filter, and replace the spark plug.
T
Tiffany GriffinAug 14, 2025
Why Craftsman E410 Lawn Mower engine will not idle?
- E
  Elizabeth Strickland PhDAug 14, 2025
  If your Craftsman Lawn Mower engine will not idle, the possible causes include a dirty air filter, old fuel (over 30 days), or an incorrect idle speed. To address this, you can clean or replace the air filter, drain the fuel tank and add fresh fuel, or adjust the idle speed.
A
Andrew DavenportAug 20, 2025
What to do if Craftsman E410 Lawn Mower engine will not accelerate?
- L
  Lindsey TaylorAug 20, 2025
  If your Craftsman Lawn Mower engine will not accelerate, consider these potential causes: old fuel (over 30 days), a blade bound with dirt or grass, or a dirty air filter. You should drain the fuel tank and add fresh fuel. Stop the engine, remove the spark plug, and clean the blade. Clean or replace the air filter.

Summary

SAFETY

SPARK ARRESTOR NOTE

CALIFORNIA PROP 65 WARNING

SAFETY & INTERNATIONAL SYMBOLS

THROWN OBJECTS CAN CAUSE SEVERE INJURY

ROTATING BLADE CAN CAUSE SEVERE INJURY

Warning about the sharp, rotating edger blade.

STARTING AND STOPPING

STARTING INSTRUCTIONS

Step-by-step guide for starting the lawn edger engine.

STOPPING INSTRUCTIONS

Procedure for safely shutting down the lawn edger engine.

USING THE ELECTRIC START ACCESSORY

STARTING INSTRUCTIONS

Steps for starting the unit using an electric start accessory.

STOPPING INSTRUCTIONS

Procedure for stopping the unit when using the electric start accessory.

MAINTENANCE

MAINTENANCE SCHEDULE

Recommended maintenance tasks and their frequencies.

REPLACING THE EDGER BLADE

Steps for removing the old edger blade.

CHECKING THE OIL LEVEL

CHANGING THE OIL

MAINTAINING THE AIR FILTER

CLEANING THE AIR FILTER

Instructions for cleaning the air filter.

TROUBLESHOOTING

Summary

SAFETY

SPARK ARRESTOR NOTE

CALIFORNIA PROP 65 WARNING

SAFETY & INTERNATIONAL SYMBOLS

THROWN OBJECTS CAN CAUSE SEVERE INJURY

ROTATING BLADE CAN CAUSE SEVERE INJURY

Warning about the sharp, rotating edger blade.

STARTING AND STOPPING

STARTING INSTRUCTIONS

Step-by-step guide for starting the lawn edger engine.

STOPPING INSTRUCTIONS

Procedure for safely shutting down the lawn edger engine.

USING THE ELECTRIC START ACCESSORY

STARTING INSTRUCTIONS

Steps for starting the unit using an electric start accessory.

STOPPING INSTRUCTIONS

Procedure for stopping the unit when using the electric start accessory.

MAINTENANCE

MAINTENANCE SCHEDULE

Recommended maintenance tasks and their frequencies.

REPLACING THE EDGER BLADE

Steps for removing the old edger blade.

CHECKING THE OIL LEVEL

CHANGING THE OIL

MAINTAINING THE AIR FILTER

CLEANING THE AIR FILTER

Instructions for cleaning the air filter.

TROUBLESHOOTING

Craftsman E410 Specifications

General

Engine Power	140cc
Cutting Height Positions	6
Mulching Capability	Yes
Bagging Capability	Yes
Side Discharge Capability	Yes
Power Source	Gasoline
Engine Type	4-Cycle
Cutting Width	21 inches
Cutting Height	1.25 - 3.75 in.
Wheel Size	7 inches front, 8 inches rear
Warranty	2 years limited

Related product manuals

Preview: Craftsman E405

Craftsman EZ 917.270810

Craftsman EZ 917.270722

Craftsman EZ 917.270913

Craftsman EZ 917.272040

Craftsman EZ3 917.272190

Craftsman EZ3 917.377590

Craftsman EZ3 917.258473

Preview: Craftsman EZ3 917.270631

Craftsman EZ3 917.270631

Craftsman EZ3 917.258542

Preview: Craftsman EZ3 917.270711

Craftsman EZ3 917.270711

Preview: Craftsman EZ3 917.256543

Craftsman EZ3 917.256543