To Next PageTo Next Page
Need help?Do you have a question about the Craftsman SEARS 917.295651 and is the answer not in the manual?
General| Model Number | 917.295651 |
|---|---|
| Category | Tiller |
| Engine Type | 4-Cycle |
| Tine Width | 26 inches |
| Tine Count | 4 |
| Forward Speeds | 1 |
| Reverse Speeds | 1 |
| Manufacturer | Craftsman |
Provides guidance on familiarizing with controls, stopping the unit, and disengaging controls quickly.
Covers inspecting the area, removing foreign objects, and ensuring proper use of equipment.
Details safe practices during operation, including hand/foot placement and caution on surfaces.
Details using high-quality detergent oil and selecting the correct SAE viscosity grade.
Step-by-step guide for draining and refilling the engine oil.
Familiarizes the user with the tiller's controls and adjustments before operation.
Provides essential instructions on operating all controls before starting the engine.
Details the correct steps for stopping both the tines/drive and the engine.
Guides the user on engaging tines and setting throttle for effective tilling.
Highlights critical checks and precautions before attempting to start the engine.
Provides instructions on how to check the engine oil level before operation.
Details the correct type of gasoline and precautions for filling the fuel tank.
Step-by-step guide on how to start the tiller's engine, including choke and throttle settings.
Instructions on checking, replacing, or straightening tiller tines for optimal performance.
Precautionary steps to prevent gum deposits in the fuel system during storage.
Instructions for draining engine oil and preparing cylinders for long-term storage.
Lists common causes and corrections for the engine failing to start.
Addresses common causes and solutions when the engine is difficult to start.
Identifies reasons for reduced engine power and their corresponding fixes.
