Craftsman Versatrack - User Manual

ENGLISH
Versatrack™

WARNING: To reduce the risk of serious personal
injury, do not use a damaged Versatrack™ hook or
Versatrack™ Trackwall. A damaged Versatrack™ hook
or Versatrack™ Trackwall will not support the weight
of the tool.

WARNING: To reduce the risk of serious personal
injury, ensure the screw holding the Versatrack™ hook
is securely tightened.

WARNING: To reduce the risk of serious personal
injury, ensure the fitting holding the hang hook
issecure.

WARNING: To reduce the risk of serious personal
injury, DO NOT suspend tool overhead or suspend
objects from the hook. ONLY suspend tool on the
Versatrack™ Trackwall using the hook.

WARNING: Ensure that the tool weight does not
exceed the maximum rated weight of 20 lb (9 kg) for
the selected Versatrack™ hook.

WARNING: When hanging objects on a Versatrack™
Trackwall rail, adequately space the tools in order to
not exceed 75 lb (35 kg) per linear foot.
NOTE: Versatrack™ accessories for use with your tool are
available at extra cost from your local dealer or authorized
service center. If you need assistance in locating any
accessory, please contact CRAFTSMAN, call 1-888-331-4569.
Cordless (Fig. A)

WARNING: To reduce the risk of serious personal
injury, turn unit off and remove the battery pack
before making any adjustments or removing/
installing attachments or accessories. An
accidental start-up can causeinjury.
IMPORTANT: When attaching the Versatrack™ hang
hook, use only the screw that is provided. Be sure to
securely tighten the screw. Versatrack™ accessories
mount compatible tools securely to the Versatrack™
Trackwallsystem.
1. Turn tool off, remove the battery pack and
removeaccessories.

CAUTION: Any product with exposed cutting teeth
must have them covered securely if it is to be on
theVersatrack™ Trackwall.
2. Attach the hang hook on the tool.
a. Place the Versatrack™ hang hook
1
onto the
mounting location at the base of the tool as shown.
b. Use a screwdriver to secure the hang hook with
the provided screw
2
. Do not use any other screw
forthis.
1
Fig. A
2
Corded (Fig. B)

WARNING: To reduce the risk of serious personal
injury, turn unit off and disconnect it from
power source before making any adjustments or
removing/installing attachments or accessories.
An accidental start-up can causeinjury.
IMPORTANT: Versatrack™ accessories mount compatible
tools securely to the Versatrack™ Trackwallsystem.
1. Turn tool off, disconnect it from power source and
removeaccessories.

CAUTION: Any product with exposed cutting teeth
must have them covered securely if it is to be on
theVersatrack™ Trackwall.
2. Mount the peg hook
3
to the Versatrack™ Trackwall
with the CRAFTSMAN logo properly oriented as shown.
3. Slide the tool loop
4
to the base of the peg hook.
NOTE: Ensure that the tool loop slides all the way to the
base of the peg hook. This relieves strain on the peg hook
and trackwall and may prevent the tool from falling.
Fig. B
3
4
Pneumatic (Fig. C)

WARNING: To reduce the risk of serious personal
injury, remove the air supply before making any
adjustments or removing/installing attachments
or accessories. An accidental actuation can
causeinjury.
IMPORTANT: Versatrack™ accessories mount compatible
tools securely to the Versatrack™ Trackwallsystem.
1. Remove the air supply and accessories.
INSTRUCTION MANUAL
MANUEL D’INSTRUCTIONS
MANUAL DE INSTRUCCIONES
IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS
OR ANY CRAFTSMAN TOOL, CALL US TOLL FREE AT:
888-331-4569.

Summary

Versatrack General Safety and Usage

Versatrack Component Integrity and Security

Warnings about using damaged Versatrack hooks or trackwall, and ensuring secure screw and fitting.

Versatrack Load and Hanging Precautions

Instructions to avoid overhead suspension and adhere to weight limits for tools and trackwall.

Versatrack Accessory Information

Note on accessory availability and customer support contact for assistance.

Cordless Tool Versatrack Attachment

Cordless Tool Pre-Attachment Safety

Warning to power off and remove battery pack before making adjustments or installing accessories.

Versatrack Hang Hook Installation

Steps for attaching the hang hook using the provided screw and ensuring secure tightening.

Cutting Teeth Safety on Trackwall

Caution to cover exposed cutting teeth on products mounted to the Versatrack Trackwall.

Corded Tool Versatrack Attachment

Corded Tool Pre-Attachment Safety

Warning to disconnect from power source before making adjustments or installing accessories.

Peg Hook and Tool Loop Installation

Instructions to mount the peg hook and slide the tool loop to the base for secure attachment.

Cutting Teeth Safety on Trackwall

Caution to cover exposed cutting teeth on products mounted to the Versatrack Trackwall.

Pneumatic Tool Versatrack Attachment

Pneumatic Tool Pre-Attachment Safety

Warning to remove air supply before making adjustments or installing accessories.

Pneumatic Accessory Installation

Instructions to remove air supply and accessories before proceeding with attachment.

Craftsman Versatrack Specifications

General

Material	Steel
Mounting Type	Wall-mounted
Type	Track System
Finish	Powder-coated
Compatibility	Craftsman Versatrack Accessories
Color	Black
Track Length	48 inches