To Next PageTo Next Page
Need help?Do you have a question about the Craftsman WEEDWACKER 358.792010 and is the answer not in the manual?
General| Engine Type | 2-cycle |
|---|---|
| Engine Displacement | 25cc |
| Cutting Width | 17 inches |
| Line Diameter | 0.095 inches |
| Type | Gas |
| Cutting Swath | 17 inches |
| Fuel Tank Capacity | 14 oz |
Specifies the model number and product name (Gasoline Weedwacker).
Outlines the main topics covered in the manual, such as Safety, Assembly, Operation, and Maintenance.
Provides a crucial warning to read all safety rules and operating instructions before use.
Details the terms and conditions of the full warranty for Craftsman professional products.
Explains the benefits and coverage offered by Craftsman's repair protection plans.
Explains DANGER alerts, focusing on using specified parts and avoiding blades.
Explains WARNING alerts, emphasizing reading the manual and potential for serious injury.
Details the hazard zone for thrown objects and recommends protective clothing and eyewear.
States that children must not operate the unit.
Provides guidelines for storing the unit and fuel safely to prevent hazards.
Warns about fire hazards related to gasoline, flames, and sparks.
Specifies the correct unleaded gasoline and two-stroke oil mixture ratio (40:1).
Emphasizes wearing safety glasses, face/dust mask, heavy clothing, and hearing protection.
Covers staying alert, avoiding alcohol/drugs, and securing loose clothing.
Details safe practices for mixing, pouring, and storing fuel, including avoiding spills.
Outlines precautions for cutting, including clearing the area and keeping bystanders away.
Lists items included in the carton and advises to check for damage or missing parts.
Provides instructions on how to properly position and secure the assist handle.
Explains the importance and correct procedure for installing the safety shield.
Identifies key parts of the trimmer through illustrations and labels.
Describes the function of the ON/STOP switch, primer bulb, throttle lock-out, and choke lever.
Covers essential safety precautions and procedures for fueling the engine.
Provides detailed instructions on mixing fuel, oil, and important handling notes.
Explains the correct procedure for stopping the engine and unit.
Guides the user through the steps for starting the engine from a cold state.
Provides steps for starting the engine when it's warm or if it becomes flooded.
Describes the correct stance and hand placement for safe and efficient operation.
Details various cutting techniques like trimming, mowing, scalping, and sweeping.
Lists essential checks to perform before and after each use.
Explains how and when to clean the air filter for optimal performance.
Covers checking fasteners, damaged parts, and cleaning the unit and decals.
Provides specific steps for cleaning the air filter using soap and water.
Advises on inspecting the muffler and spark arresting screen for carbon buildup.
Details the process and specifications for replacing the spark plug.
Instructions for replacing line in a fixed line trimmer head, including line types.
Step-by-step guide for replacing line in a bump feed trimmer head.
Guides on how to rewind the trimmer line onto the spool correctly.
Addresses issues where the cutting line retreats into the trimmer head.
Instructions for removing and installing a new trimmer head.
Details how to adjust the carburetor idle speed for proper operation.
Provides guidelines for storing the unit, including seasonal preparation.
Provides additional notes on engine fueling, operation, and storage of gasoline.
A table listing common problems, their causes, and recommended remedies.
Outlines the owner's responsibilities for maintenance and care of the emissions system.
Specifies which parts and failures are covered by the emissions warranty.
Informs where to obtain warranty services and repairs.
Lists emission-related parts covered and states owner's maintenance responsibilities.
Indicates the emission standards the engine is certified to meet.
