Do you have a question about the Craftsman WEEDWACKER 358.798430 and is the answer not in the manual?
Engine Displacement | 25 cc |
---|---|
Engine Type | 2-cycle |
Cutting Swath | 17 inches |
Type | Gas Trimmer |
Shaft Type | Straight |
Guidelines for personal protection and safe operation of the weedwacker.
Ensuring the unit is in good working order for safe operation and longevity.
Precautions for handling and storing gasoline and fuel mixtures safely.
Procedures to prevent injury from the cutting head and thrown objects.
Safe methods for moving and storing the weedwacker unit.
Health warnings related to prolonged use and vibrations.
Location and importance of model and serial number recording.
Information about available extended maintenance plans for the unit.
Operator's role in maintaining the unit and understanding warranty terms.
Recommended checks and services based on usage intervals.
Essential inspections for damaged parts and loose fasteners before operation.
Procedures for cleaning the unit after operation.
Instructions for lubricating the drive shaft mechanism.
Tasks to perform after 5 hours of operation or 5 tanks of fuel.
Tasks to perform after 25 hours of operation or annually.
Annual tasks such as replacing spark plugs and air filters.
Instructions for replacing the fuel filter.
List of optional or included accessories for the weedwacker.
List of tools needed for putting the unit together.
Step-by-step guide to unpack the unit safely.
General guidance for assembling the unit.
Instructions for attaching and adjusting the assist handle.
Steps to properly attach the debris shield for safety.
Guide to installing the cutting head onto the unit.
Familiarization with the unit's components and controls.
Step-by-step instructions for operating the weedwacker.
How to position the assist handle for comfort and control.
Method for advancing the cutting line.
Crucial steps and information before the initial engine start.
Correct ratio and procedure for mixing fuel and oil.
Step-by-step guide for starting the engine.
Troubleshooting steps for engines that won't start.
Advice for efficient and effective use of the weedwacker.
Different methods like trimming, scalping, mowing, and sweeping.
Specific hazards related to the trimmer line and shield.
Personal protective gear and safe operating practices.
Checks and precautions related to the weedwacker unit itself.
Safe practices during the cutting process.
Detailed instructions for replacing the starter rope.
Procedures for installing new trimmer line.
How to install a spool with line already wound.
Steps to wind new line onto an empty spool.
Factory settings for the carburetor if adjustments are needed.
How to set the engine's idle speed correctly.
Adjusting the fuel-air mixture for optimal performance.
Verifying smooth engine acceleration after adjustments.
Preparing the unit for long-term storage.
Procedures for draining and preparing the fuel system.
Steps to protect the engine during storage.
General advice for storing the unit and fuel.
Common problems and their solutions.
Visual guide and list of replaceable parts for the model.