To Next PageTo Next Page
Need help?Do you have a question about the Craftsman WEEDWACKER 358.798441 and is the answer not in the manual?
General| Engine Displacement | 25 cc |
|---|---|
| Engine Type | 2-Cycle |
| Cutting Swath | 17 inches |
| Weight | 12.5 lbs |
| Type | Gas-powered trimmer |
| Shaft Type | Straight shaft |
Details on how to adjust and position the assist handle for optimal comfort and control during operation.
Instructions for correctly installing the plastic debris shield for operator and bystander safety.
Step-by-step guide to correctly attach the semi-automatic trimmer head to the arbor shaft.
Familiarize yourself with the location of controls and adjustments on the weedwacker unit.
Explanation of the throttle trigger, choke, primer bulb, and assist handle functions.
Instructions on how to advance the trimmer line using the semi-automatic trimmer head.
Guidance on adjusting the assist handle for optimal balance and control during operation.
Critical safety warnings regarding thrown objects, personal protection, and bystander safety.
Essential safety guidelines for the operator, including protective gear and proper conduct.
Pre-use inspection requirements for parts, line, shields, and fasteners to ensure unit safety.
Safe techniques for cutting, including area inspection, body positioning, and cutting direction.
Information on the correct type of gasoline and oil mixture for the 2-cycle engine.
Guidance on using fuel stabilizer to prevent gum deposits and protect the fuel system during storage.
Recommendation for using specific 2-cycle engine oil and warnings against using automotive or boat oils.
Instructions and chart for correctly mixing gasoline and 2-cycle engine oil at a 40:1 ratio.
Procedure for safely stopping the weedwacker engine using the momentary switch or choke.
Detailed steps for cold and warm engine starts, including primer bulb and choke usage.
Troubleshooting steps for engines that are flooded or fail to start after multiple attempts.
A schedule outlining regular maintenance tasks and their recommended frequency for optimal performance.
Important advice on maintaining the unit, warranty, and periodic checks for adjustments.
Essential checks for damaged parts, loose fasteners, and labels before operating the unit.
Instructions for cleaning the unit and labels after each use to maintain its condition.
Procedure for cleaning the air filter to ensure proper engine performance and reduce emissions.
Steps for cleaning the spark arrestor screen to prevent fire hazards and maintain engine performance.
Instructions for replacing the spark plug annually to ensure easier engine starting and better performance.
Detailed instructions for removing and replacing the fuel filter in the fuel tank.
Procedure for lubricating the gear box with grease to ensure smooth operation and longevity.
Instructions for replacing trimmer line, including warnings and use of correct line diameter.
Step-by-step guide to installing a pre-wound spool into the semi-automatic trimmer head.
Instructions for winding new trimmer line onto an empty spool for use.
Procedure to adjust the engine's idle speed for smooth operation without stalling.
Steps to adjust the fuel-air mixture for optimal engine performance at various speeds.
How to check and adjust for smooth engine acceleration from idle to full throttle.
Steps for preparing the weedwacker for storage, including cleaning and fuel system preparation.
Instructions for draining the fuel tank and lines to prevent fuel system damage during storage.
Procedure to protect the internal engine components during storage by adding oil.
