OPERATIONS
-14-
Playback of a CD:
352* Button. The Program menu will appear as follows.
1
2
3
4
5
02
04
6
7
8
9
10
Exit
B_
B_
B_
B_
B_
B_
B_
B_
NEXT
Start
press the
( Program )
After setting, using the Direction Button to select and highlight the " Start " Button on the
screen then press the
ENTER
Button to start program playback.
During CD playback,
tracks.
Using the Direction and Numeric Buttons to select and set the desired
(During setting, press the "Clear" Button to clear the incorrect input).
2. Press the OPEN/CLOSE ( ) Button to open the disc tray . Place the disc on the center of tray with
label side face up. Closed the tray by press the OPEN/CLOSE ( ) Button. The unit will start
playback automatically.
3. During playback:
~ Press the or Buttons repeatedly to search for a specific section forward/backward.
Press Play/Pause Button to resume normal playback.
~ Press the or Buttons repeatedly to skip to specific tracks/chapters.
~ Press Play/Pause Button to pause, press again to resume normal playback.
~ Press the VOLUME +/- Button to adjust volume level.
4. Press the STOP Button to stop playback. The player will remember the point where disc was stopped. When
Press the Play/Pause Button again, playback will start from this point. To stop playback completely or to start
Button twice.
NOTE: If the player will not be used for a long period of time, power off the player and unplug
the AC/DC adaptor from wall outlet.
5. To power off, press the Button to turn off (standby mode) the player. The color of the STANDBY Indicator
will turn to red.
OPagain from the beginning, press ST
1. Connected the DVD Player to the TV and power on it as previous procedures.
PROG ( Program ):
To Next Page
Loading...
