Craig CVD401A User Manual (English)

Questions and Answers:

N
Nancy HoodAug 18, 2025
Why is my Craig CVD401A remote control not working?
- S
  sweeksAug 18, 2025
  The remote control might not be working for several reasons: * The batteries may be weak or dead: Replace them. * The batteries may not be installed properly: Install them according to the polarity markings inside the battery compartment. * The remote may not be aimed at the sensor: Aim the remote directly at the sensor. * The distance may be too far: Operate the remote within 15 feet. * There may be an obstacle in the path of the beam: Remove any obstacles.
J
Jill EvansAug 20, 2025
What to do if my Craig CVD401A DVD Player has no picture and/or no sound?
- J
  joseph92Aug 20, 2025
  If you're experiencing no picture or sound with your Craig DVD player, consider these potential causes: * The connection cables may not be installed correctly: Re-install the connection cables. * The video output of the player may be incorrectly set: Press the VIDEO button repeatedly until the correct picture appears on the TV. * The connected TV power is off: Turn the TV on.
B
Bryan KirbyAug 22, 2025
What to do if my Craig DVD Player has power but isn't functioning properly?
- B
  Bryan FaulknerAug 23, 2025
  If your Craig DVD player has power but isn't working correctly, consider the following: * Condensation may have formed: Unplug the unit and wait about one to two hours until the player is dry. * Wrong type of discs or the disc is corrupted: Try other discs. * The disc is dirty or inserted incorrectly: Clean the disc and insert it with the label side up.
S
Sharon WintersAug 26, 2025
How to fix playback picture rolling on Craig CVD401A DVD Player?
- D
  Douglas GilesAug 26, 2025
  If the playback picture is rolling on your Craig DVD player, the color system settings may be incorrect. Press the N/P button repeatedly until the correct picture appears on the TV.
A
alexjohnsonAug 27, 2025
Why is there no power to my Craig CVD401A DVD Player?
- B
  Brandy RobinsonAug 28, 2025
  If your Craig DVD player has no power, the AC/DC adapter may be unplugged. Insert the small plug from the supplied AC/DC adapter into the DC IN Jack on the rear of the Player and ensure the AC/DC adapter is plugged into a working AC outlet.
J
Jonathan HarrisAug 30, 2025
Why is the picture quality no good on my Craig DVD Player?
- D
  David NelsonAug 30, 2025
  If the picture quality is poor on your Craig DVD player, the disc may be dirty. Clean the disc.
H
Heather PattonSep 2, 2025
Why are the subtitles not working properly on my Craig DVD Player?
- L
  Linda MatthewsSep 2, 2025
  The subtitles may not be working properly on your Craig DVD Player, because subtitles are not turned on. Turn the subtitle on, or the function is not available on the current disc, try other discs.
B
Bill LambSep 4, 2025
How to fix a Craig CVD401A that won't start playback?
- S
  Sean LeeSep 4, 2025
  If your Craig DVD player won't start playback, here are a few things to check: * DVD not inserted, or inserted up-side-down: Insert DVD correctly. * A non-playable disc is inserted: Try other CD, DVD discs. * The disc is not placed in the tray: Place the disc on the disc tray correctly. * The disc is dirty: Clean the disc.
S
Sarah PerezSep 7, 2025
How to reset the Rating Level password on a Craig CVD401A if forgotten?
- C
  Christopher HeathSep 7, 2025
  To reset the Rating Level password on your Craig DVD player, use the super password "4010” to release the lock and reset a new password.
V
vargasdavidSep 9, 2025
Why is the selected language not being shown in the subtitles, or spoken on my Craig CVD401A DVD Player?
- S
  Samuel MullinsSep 9, 2025
  The preset sound Language or subtitle may not be available on the current disc. Try other discs.

Craig CVD401A Specifications

General

Type	DVD Player
Audio Output	Stereo Audio
Remote Control	Yes
Power Supply	AC 120V, 60Hz
Supported Formats	DVD, CD, JPEG
Video Output	Composite Video
Screen Size Compatibility	4:3, 16:9