How to fix Craig Quadcopter remote control not working?
If your Craig Quadcopter's remote control isn't working, first, the batteries might be dead, so try replacing them with new ones. If that doesn't solve the problem, make sure the batteries are installed correctly, matching the polarity markings inside the battery compartment.
What to do if Craig Quadcopter blades still running after landing?
If the blades of your Craig Quadcopter continue to run after landing, it means that the unit hasn't shut off properly. To resolve this, push the Left Joystick downward and wait until the blades completely stop turning. After that, disconnect the plug from the battery to the DC IN Jack on the unit.
How to fix Craig Quadcopter moving not straightly?
If your Craig Quadcopter isn't moving straight or is turning automatically, you can adjust its motion using the Speed Trimmer, Crab Trimmer, Left/Right Trimmer, and/or Forward/Backward Trimmer.
Why is my Craig Quadcopter control abnormal?
If your Craig Quadcopter's control is abnormal or its motion is unstable, one or more blades may be deformed or damaged. Inspect the blades and replace any that are deformed or damaged with new ones.
Key instructions, operating range, and safety precautions for safe use of the unit.
Steps and guidelines for charging the unit's internal Li-ion battery.
Instructions for installing batteries and important precautions for battery usage.
Guide on inserting, removing, and formatting the Micro SD card for data recording.
Steps for pairing, controlling flight, camera functions, and using various controls.
Instructions for replacing damaged or deformed blades.
Technical details of the unit and remote control, including power and frequency.
List of items included in the product package.
Explains warranty coverage, exclusions, and procedures for obtaining service.
General| Brand | Craig |
|---|---|
| Model | INTERCEPTOR |
| Category | Quadcopters |
| Language | English |
To Next Page
