Cramer 82T20 - EC Declaration of Conformity; Declaration of Conformity with EU Directives; Applied Harmonised Standards

Problem Possible Cause Solution
The line
does not ad-
vance.
Lines are welded
to themselves.
Lubricate with silicone
spray.
Not enough line
on the spool.
Install more line.
Lines are worn
and too short.
Advance the cutting line.
Lines are tangled
on the spool.
1. Remove the lines from
the spool.
2. Wind the lines.
The line
keeps
breaking.
The machine is
used incorrectly.
1. Cut with the tip of the
line, avoid stones, walls
and other hard objects.
2. Advance the cutting
line regularly to keep full
cutting width.
The grass
winds
around the
trimmer
head and
motor hous-
ing.
Cut tall grass at
ground level.
1. Cut tall grass from the
top down.
2. Remove no more than
20 cm in each pass to
prevent wrapping.
The line
does not cut
well.
The cut-off blade
becomes dull.
Sharpen the cut-off blade
with a file or replace it.
Vibration
increases
obviously.
The line is worn
down at one side
and not advanced
in time.
Make sure that the line on
both sides is equal. Ad-
vance the line.
8 TECHNICAL DATA
Voltage 82 V
No load speed 5000-6000 ±10% min
-1
(Grass trim-
mer),5000-6000±10% min
-1
(Brush
cutter)
Cutting head Bump feed / Brush cutter blade
Cutting line diame-
ter
2.4 mm
Cutting path diam-
eter
406 mm (Grass trimmer), 300 mm
(Brush cutter)
Weight (without
battery pack)
4.65 kg
Battery model 82V180, 82V290P, 82V360, 82V580P
and other BAB series
Charger model 82C6 and other CAB series
Grass trimmer Measured sound
pressure level
L
PA
=86.1 dB(A),
K
pA
= 3 dB(A)
Guaranteed sound
power level
L
WA.d
= 96 dB(A)
Vibration 6.104 m/s
2
, k=1.5
m/s
2
Brush cutter Measured sound
pressure level
L
PA
=86.4dB(A),
K= 3 dB(A)
Guaranteed sound
power level
L
WA.d
=96 dB(A)
Vibration 6.104 m/s
2
, k=1.5
m/s
2
IPX IPX4
XX
96 dB. Noise value. (Grass trimmer)
96 dB. Noise value. (Brush cutter)
9 EC DECLARATION OF
CONFORMITY
Name and address of the manufacturer:
Name: GLOBGRO AB
Globe Group Europe
Address: Riggaregatan 53 211 13 Malmö, Sweden
Name and address of the person authorised to compile the
technical file:
Name:
Micael Johansson
Address: Riggaregatan 53 211 13 Malmö, Sweden
Herewith we declare that the product
Category:
String trimmer / Brush cutter
Model: 82T20 (STB414)
Serial number: See product rating label
Year of Construction: See product rating label
• is in conformity with the relevant provisions of the
Machinery Directive 2006/42/EC.
• is in conformity with the provisions of the following
other EC-Directives:
• 2014/30/EU
• 2000/14/EC & 2005/88/EC
• 2011/65/EU & (EU)2015/863
Furthermore, we declare that the following parts, clauses of
harmonised standards have been used:
8
English
EN