10
PRODUCED IN CHINA FOR:
ALDI STORES LTD. PO BOX 26, ATHERSTONE,
WARWICKSHIRE, CV9 2SH.
ALDI STORES (IRELAND) LTD.
PO BOX 726, NAAS, CO. KILDARE.
Visit us at www.aldi.com
LCD DISPLAY
1. BATTERY INDICATOR
Displays an estimate of the battery strength that remains before requiring a recharge.
A fully charged battery (100%) will show 6 bars.
Please remember to charge your battery when it is on its last bar. As the battery
depletes, the strength of the motor will get weaker.
2. GEAR
The gear can be toggled from Gear 1 to Gear 3, by pressing the SPEED+ or SPEED- buttons.
Each gear settings will give a different level of acceleration and maximum speed.
Gear 1: Slow Acceleration. Gear 2: Medium Acceleration. Gear 3: Fastest Acceleration.
3. DISTANCE
This serves as an ODOMETER that keeps track of the total distance accumulated on
the scooter. It can also show other settings, refer to OPERATION section.
4. SPEED
Shows the current speed you are traveling at.
OPERATING PRINCIPLES
Operation
• Hold the ON/OFF button for 2 seconds to turn the scooter OFF or ON.
• Pressing the ON/OFF button for 0.5 seconds will show different display settings:
o DIS: Current mileage accumulated.
o ODO: Total accumulated mileage since riding the scooter.
o VOL: Displays the current battery voltage.
o RPS: Displays the motor speed.
o TIME: Shows how long the scooter has been turned on for.
• Turn on/off the front light by pressing the front light button.
• The rear light lights up automatically from the vibrations while driving the scooter.
Settings
Hold the SPEED+ and SPEED- buttons down simultaneously for 2 seconds to enter or
exit settings menu.
• P1: Speed display settings. 1 is mph. 0 is kmh.
• P2: cruise control. 1 is cruise control on. 0 is cruise control off.
To Next Page
Loading...
General