3. Activate the desired notification functions by pushing the corresponding slider to
the right ( ).
If you would like to configure how the Smartwatch is to alert you of a notification,
push the corresponding notification function.
You now have the choice of setting the flashing frequency (“Flash”) of the LED light
(“Off”, “Slow” or “Fast”), the dialling tone (“Off”, “Single” or “Multiple”) and the
intensity of the vibration (“Off”, “Weak” or “Strong”).
You also have the option of defining the duration of each status signal. Use the
“Duration” slider to select a time between 1 and 5 seconds.
To Next Page
Loading...
