Configuring alarms
In the Crane Connect app, you can configure up to three alarms per day.
1. On your smartphone or tablet, open the Crane Connect app and access the settings
for the Smartwatch.
2. Under “Alarm”, select one of the three preset alarms by pushing the time.
3. Set the desired time at which the alarm is to be activated.
4. Push “Done” or “OK”.
5. Activate the desired alarm by pushing the corresponding slider to the right (
).
You have now set the alarm. At the set time, the Smartwatch will emit the signals set in
the app (see chapter “Configuring notifications”).
To Next Page
Loading...
Need help?
General
