Crane PULSE WATCH - Page 27

First use
27
2. To confirm your selection, push the “MODE” button
5
.
The minutes will blink.
3. Set the minutes by pushing the “ST./STP.” button (for-
ward) or “SELECT” button (back).
If you hold the “ST./STP.” button or the
“SELECT” button down for longer than one sec-
ond, fast forward or rewind will start.
4. To confirm your selection, push the “MODE” button.
The hours will blink.
5. Set the hours by pushing the “ST./STP.” button (forward)
or “SELECT” button (back).