Crane PULSE WATCH - Power Saving Mode

Main modes
76
As soon as all timers have reached 0:00, the first timer will
start to count down from the set time etc. until a timer is
stopped by pushing the “ST./STP.” button.
− To reset all timers to 0:00, hold the “SELECT” button down
for 5 seconds.
Power saving mode
The pulse watch has a power saving mode. In power saving
mode, the display
3
is switched off to preserve battery power.
1. To activate power saving mode, push and hold the
“SELECT” button
4
for approx. 5 seconds in time mode.
The display will switch off.
The settings in the various modes remain saved in the
process.