First use
32
5. Specify whether you would like to use pounds and inches
(ENG) or kilograms and centimeters (METR) as the unit of
measure.
6. To confirm your selection, push the “MODE” button.
The “HEIGHT” indicator will appear.
7. Enter your height by pushing the “ST./STP.” button (for-
ward) or “SELECT” button (back).
8. To confirm your selection, push the “MODE” button.
The “WEIGHT” indicator will appear.
9. Enter your weight by pushing the “ST./STP.” button (for-
ward) or “SELECT” button (back).
10. To confirm your selection, push the “MODE” button.
To Next Page
Loading...
